waterborne industrial primer-topcoat coatings

Descripción del producto

~•Characteristics: â—¦High weathering and water-resistant
â—¦Nice adhesion and paint film is tough
â—¦Nice color retention
â—¦Quick drying
â—¦According to GB color card or provided by customer

•Product description: single component waterborne acrylic (modified) paint for steel
•Performance features: â—¦Can be applied directly on rusty steel (≤*0mm rust layer)
â—¦Single component
â—¦Completely water-based eco-friendly
â—¦Quick drying high coverage
â—¦Color and appearance: gray or other
â—¦Coating thickness: *3 ±5mm
â—¦Solid content: *5 ±3%
â—¦Density: 1.2g3/Voc, ≤*0g/L
â—¦Primer dry time (≤*0% RH)
â—¦Temperature: *0, *5, *0, *5 and *0 degrees Celsius
â—¦Surface dry: *5, *5, *0, *5 and *0 minutes
â—¦Hard dry: *2, *6, *0, *4 and *8h
â—¦Primer may dry quicker in operation, please still follow this instruction
â—¦Theoretical coverage: *2m2/L or *0m2/kg
â—¦Over-coating interval: â—¦Minimum: 4 hours
â—¦Maximum: unlimited

â—¦Recommended substrate conditions and temperature:

•Remove all oil or grease, soluble contaminants and other foreign matter â—¦All surfaces to be coated should be clean, dry and free from contamination
â—¦If applied on rusty surface, rusty layer thickness should be below *0mm, other than bottom surface processing requirements, without acid and sandblasting processing catalytic reaction, to get black protective layer and solvent (acrylic acid, polyurethane, epoxy resin, alkyd resin, amino paint or water-based paint) match well, will not occur and paint color bleeding
â—¦Apply in nice weather, don't let coating contact any liquid like water or other solvent before completely dry, no painting be carried out in rainy day outdoor
â—¦If humidity is above *5% please stop painting
â—¦Temperature of substrate should be above 5 degrees
â—¦Lower temperature might not dry or cause long time to dry

•Air spray: â—¦Nozzle orifice: 1.**2.5mm
â—¦Nozzle pressure: 0.**0.5MPa

•Airless spray: â—¦Nozzle orifice: 0.**0.5mm
â—¦Nozzle pressure: ****5mpa

•Brush: use soft brush
•Recommended finish: RSL series
•Storage temperature: ***0 degrees Celsius in well ventilated warehouse
•Stir thoroughly before painting
•Don't use any steel or other metal stick to stir paint
•Can affect quality of this product
•Applicable fields: â—¦Shipbuilding, steel structure, machinery, oil storage tank, container, petrochemical pipeline con