Metal cutting

Descripción del producto

Technical Parameters：   
Table Size*******************************************************-***0x***0mm
Cutting Size****************************************************-***0x***0mm
Z axis moving height*****************************************-*0mm
X axis max speed*********************************************-*6M/min
      Max. Interpolation speed*************************************- ***0mm/min
      Positional Accuracy********************************************-0.*8mm/**0mm
Repeat Position Accuracy*************************************-±0.*5mm
 
System Composition：
Sealed-off CO2Laser Glass tube*********************-**0W, **0W, **0W，etc.
Laser wavelength**************************************- *0.6um
Laser power fluctuation********************************-〈±5%〉
Lasing Mode********************************************-Lower order mode
Driving system*******-Bipolar constant phase flow driven by H bridge subdivided control mode of drives
                   X axis****- *7N.cm    ****0 micro step
                   Y axis****- *5N.cm    ****0 micro step
Board embedded microcomputer control system: Biaxial linkage, straight line, round interpolation
Transmission system**-**-Precision level T linear rolling guide
                    Industrial-grade synchronous gear belt, high quality carbon steel gear.
The optical system-****-The focal length (F=**0mm) medium & telephoto lens（Standard Configuration）
                    Precision fine adjustment and since locking optical lens
                    Angle adjustable range~*0  
                    Angular resolution ~0.*5mrad
                    Precision grinding and forging metal molybdenum reflecting mirror.                         
                    Positive pressure gas to protect the mirror.
Machine Details:
1. Special laser head, with auto sensor for metal and nonmetal materials. Thermal probe is installed beside cutting head, the heating temperature is > *5℃, siren and alarm when continuous heating time > 8 seconds.
2.Unique design of the air channel, not only that can cool the reflective lens, but also form a set of positive air curtain on front of the reflecting mirror, blowing away the dust on the surface of the lens, the formation of the local positive pressure to prevent dust intrusion.
3. Embedded microcomputer control system, the realization of two axis linear, circular interpolation solitude, s-shaped acceleration and deceleration curve, ensure that after the synthesis of the biaxial linkage is much smoother. Accept the DXF, PLT, the AI format file, etc.
4. Two strictly adjust parallel precision linear rolling guide (Y axis) bearing beam (X axis) by double block, bilateral drive gantry structure, and open processing areas which make local laser cutting of overlength board be possible. Thick-walled aluminum beam inside filled with bubble, improve its rigidity and minimize the noise.
Precision level T linear rolling guide and the transmission efficiency is as high as *5 ~ *2%. Thin neoprene synchronous cog belt has excellent dynamic flexing and crack resistance, stable running, aging resistant, heat resistant, wear-resisting, etc.
 

1. Precision manufacturing professional optical reflector, angular resolution is as high as 0.*5 m rad, pitch 0.3 mm fine-tuning, excellent self-locking performance closely, ensure that adjust the right mirror for a long time remain in place without drift. F = **0 mm medium & telephoto lens (standard), the realization of thick plate cutting and cutting section is more flat.