504 double-component laminating Adhesive (Metal/PET)

Precio FOB

Obtener el precio más reciente

( Negotiable )

16 Ton Minimum Order

País:

China

N º de Modelo:

JXHM504

Precio FOB:

( Negotiable )(Negociable) Obtener el precio más reciente

Lugar de origen:

Precio de pedido mínimo:

Cantidad de pedido mínimo:

16 Ton

Detalle de embalaje:

20L iron pail

El tiempo de entrega:

20 to 30 days

Capacidad de suministro:

16 Ton per Month

Tipo de pago:

Other, PayPal, T/T

Grupo de productos :

adhesive

Contactar ahora

XiangYang Jingxin Hui Ming Technology Co., LTD

China

Miembro Básico

Persona de contacto Ms. Becky

fengxiang, Foshan, Guangdong

Contactar ahora

Especificaciones del producto

Color :cream white
State:sticky liquid
Viscosity:1000~2500
Shelf life:6 month

Descripción del producto

**4 laminating Adhesive (Metal/PET)

**4 isa two-component special polyurethane laminating adhesive for lamination of metal. Because of its strong adhesion to metal, it is especially suitable for bonding of metal coils (aluminum foil, iron coils and others) and polyester (PET), polypropylene (PP, CPP, BOPP), polyamide (PA) film that surface activation has been treated. Clean the surface of metal coils before bonding. Compound product coated with the adhesive is characterized by excellent strong adhesion, high transparency,excellent aging resistance, high temperature resistance,excellentsolvent resistance, non-toxic and odorless, and it can beboiled at **0â„ƒ also.

Technical performance index

Index	Main agent	Curing agent
Type	JXHM4**	JXHM4**
Appearance	Clear orlight yellow transparent sticky liquid	Clear orlight yellow transparent sticky liquid
Solid contentï¼ˆ%ï¼‰	*0±2	*0±2
Viscosity *( 5â„ƒmpa.s)**	********0
NCO content(%)		*2.0±0.5
Peeling strength (manual removal)	Substrate is brokenï¼ˆaccording to clients standardï¼‰
Shelf life	6 months	6 months

Ratio for reference (Adjustable concentration)

Main agent	diluent	Curing agent	Remarks
*0	5ï½ž8	2ï½ž2.2	Ethyl acetate as diluent

It is advised to use this ratio, which is *0:5:2 first. You can adjust it appropriately depending on requirements.

Process conditions

1.The amount of coated adhesive:coating amount(dry basis) can be chosen from 4.0g/ ãŽ¡ to 5.0g/ ãŽ¡, depending on the requirements.

2.Temperature of Drying Tunnel:first stage:*0°C; second stage:*0°C; third stage:*0°C;fourth stage:*0°C

3.Hot-pressing temperature: *0°C~**0°C.

4.Hardening condition: keep it at *0°C~*0°C for *4~*8 hours.

Cautions

1.Cant be mix with otherAdhesives.

2. To avoid turbidity, please clean all equipment, including plastic tank, buckets and relevant tools before using the adhesive.

3.The formulated glue should be used up within8 hours after it is ready-made. If continuing to use the remain, the mixture of the remain and new formulated glue together should not exceed 8 hours.(if exceed8 hours,solidification is likely to come out)

4. Theprocess ratio in this paper isfor reference only.Due to different manufactures are with different technology conditions, raw material conditions and equipment conditions, we recommend that manufactures confirm the pre-tests or consult with us before using. Our products are only sold according to general condition.

5. According to customer demand for products, we can make the overall design of the program, including modifying the product formulation and setting the process methods.

Appendix: process conditions of iron combination

Temperature of preheating iron sheet in Drying Tunnel:*0â„ƒ**0â„ƒ;

Heating speed:*0m per minute.

Coating technology of combination

1.The amount of coated adhesive:**5g/ ãŽ¡(dry rubber)

2.Temperature of Drying Tunnel: first stage:*0°C; second stage:*0°C; third stage:*0°C;fourthstage:*0°C

3.Shut temperature:90°C~**0°C.

4.Recombination velocity:*0m per minute.

5.hardening time: keep aging at *0°C~*0°C in drying chamber for *4~*8 hours.

Quality index of compound iron sheet

Salt resistance:intrude it into solvent(concentration :5~8%) for 3 days.Two film still keep sticking together.

Hot water resistance:intrude it into hot water(temperature: *0°C~**0°C) for *0 minutes.Two film still keep sticking together.

Alkali(NaOH) resistance:intrude it into solvent(pH=*3,concentration:0.1mol/L) for 5 hours. Detect it with pH test paper.

Acid(H2SO4) resistance:intrude it into solvent(pH=1,concentration:0.5mol/L) for *4 hours.Detect it with pH test paper.

Requirements for product

Boil it in **0°C,and two film still keep sticking together in *5 minutes.

País:	China
N º de Modelo:	JXHM504
Precio FOB:	( Negotiable ) (Negociable) Obtener el precio más reciente
Lugar de origen:	-
Precio de pedido mínimo:	-
Cantidad de pedido mínimo:	16 Ton
Detalle de embalaje:	20L iron pail
El tiempo de entrega:	20 to 30 days
Capacidad de suministro:	16 Ton per Month
Tipo de pago:	Other, PayPal, T/T
Grupo de productos :	adhesive