ZHUZHOU BETTER TUNGSTEN CARBIDE CO., LIMITED

There are many many sizes. We may also do according to your ***** are presseed by DOS Machine. The grade we

D1 Type: For making end milling tools, periphery turning tools and boring tools. D2 TYPE For making *-edged

We can supply ISO standard brazed tips, A, B, C, D, E. National standard: A1, A2, A3, A4, A5, A6, B1, B2, B3

many sizes and grades for your selections. **5***5* **0***0* **0***0* **0***0* ***** The thickness can

Physical and mechanical properties of grades for cemented carbide brazed tips and their applications recommend

Physical and mechanical properties of grades for cemented carbide brazed tips and their applications recommend

There are many grads, MK8, MK*5C, MK*1C and so on. There are many other size of this shap, just according t

1. YG*5 For fabricating drawing dies of stain tubes and rods under High compressibility ratio;punching st

Different grade with diffeverent wear resistant properties.Small drawing dies, mdeium size drawing dies, la

drlling bits, buttons, for mining There are grades such as YG4C, YG8C, YG*1C, YG*3C, YG*5C, YG*6C. There are

Brazed tips as per ISO such as A, B, C, D, E. Blanks or ground tips such as SNC, SPC, SNC, SECN and so on. M

Made of tungsten carbide , used for cutting electronic board or cemented. There are many sizes as follows:

Fast delivery, economic price, good quality It is made of tungsten carbide, with a long life, wear resistance

made of tungsten carbide, used on saw blades , for cutting wood, steel, and orther material. There are many

made of tungsten carbide, used for cutting stone. The grade is YG8C, YG9C, YG*1c There are also many s

tungsten carbide balls used as a wear resistant parts good quality, cheap price, fast delivery, satisfied se

Grade Density Hardness Performance & application recommended g/cm3 Mpa HRA YM6A *4.9 ***0

A *3.5 ***0 *3.5 Good we

Various of grade such as YT5, YT*5, YT*4, YW2, YW1, M*0 various of sizes such as ******1 ******1 * may also

We have many kinds of carbide blades, inserts and other cutters. We can provide both the blanks and grind ones