Sichuan Zhongli Building Materials Techn

Forming 2 gypsum boards once per mold device. Cycle the production with more panel molds equipped according t

Forming 2 gypsum boards once per mold device. Cycle the production with more panel molds equipped according t

Forming 2 gypsum boards once per mold device. Cycle the production with more panel molds equipped according t

Less investment: the project has less investment but high output Good profit: high cost profit and profit for

Multi-function of the machine, length can be adjusted. Automatic mold open/closing and thermostat Less inves

Less investment: the project has less investment but high output Good profit: high cost profit and profit for

Multi-function of the machine, length can be adjusted. Excellent performance: the product can satisfy the per

Great significance: it is of great practical significance to the enterprise upgrade, energy-saving of the buil

Preferential policy: the project has the feature of earth-saving, energy-saving and waste-utilization, meeting

Electroplating Hard chrome aseptic technic inside the mold, which do not rust easily with long service ages.

Less investment: the project has less investment but high output Good profit: high cost profit and profit for

Production Procedure Transferring proper proportion of raw materials to stirring machine. Pouring the mate

Compared to hand mold, our machine has some Advantages bellow: only **3 minutes/pic, productivity increased *

Water absorbing rate (%) : *7.6 Shock strength (kj/m) : 9.0 Flexible impact resistance : not cracking St

Technical Indication Water absorbing rate (%) : *7.6 Shock strength (kj/m) : 9.0 Flexible impact resista

Power: low power consumption, **0v, total power 3.4KW Technology: High automation, operation is simple and co

Transferring proper proportion of raw materials to stirring machine. Pouring the materials mixed in balance i

Electroplating Hard chrome aseptic technic inside the mold, which do not rust easily with long service ages.

Feature 1.Less investment: the project has less investment but high output 2.Good profit: high cost profit

Forming 2 gypsum boards once per mold device. Cycle the production with more panel molds equipped according t