Shengli Oil Field Xinda Guanye Science And Technology Development Co, .Ltd

Introduction: Put prepreg like glass fiber and its products into the mould cavity under moulding temperature,

FRP Process pipe Product Description Range of production: Diameter DN**-DN***0; Pressure 0.1MPa*2.5MPa Exec

Introduction: Made by composite moulding of glass fiber cloth, chopped strand mat and gel coat resin.

FRP Mortar pipe Introduction: Pipeline made with fixed-length winding technology, centrifugal casting techno

FRP small-scale storage tank Introduction: This vessel is fabricated by way of filament winding and filament

Introduction: The tubing is fabricated by special technology, using organic powder as matrix and nano titaniu

Introduction: This is FRP thin-walled sectional product made by hand lay-up moulding or compression moulding,

Introduction: Fabricated by pultrusion equipment, using glass fiber and its products as the reinforcing mater

Introduction: Tubing made by filament winding of epoxy resin and high-strength glass fiber roving.

GRE anti-wear tubing Introduction: Tubing made by filament winding of epoxy resin and high-strength glass fi

General GRE water injection pipe Introduction: Tubing made by filament winding of epoxy resin and high-stren

GRE downhole tubing 1.characteristics 1 Excellent mechanical and physical performance, lighter weigh

High-strength composite material liner Introduction: The high-strength composite material liner is made by

FRP pressure vessel Specs Nominal diameter: ***0mm; Capacity: **0m. Pressure rating: 0.6MPa.

FRP fittings Introduction: Fabricated by mechanical winding or hand lay-up moulding techniques, using glass

Low pressure FRP pipeline Introduction: Pressure pipe that can stand internal pressure made by fixed-length

FRP large-scale storage tank Introduction: This vessel is fabricated by way of filament winding and filamen

High pressure GRE pipe Introduction: High-pressure pipeline made by filament winding of epoxy resin and high

GRE separate injection pipe Introduction: Tubing made by filament winding of epoxy resin and high-strength g