Shandong Zhaoxin Oil Tools Co., Ltd

1.Sucker rods centralizers are made up of three components: Spindle Sleeve Rod Couplings 2.The sucker

high quality alloy steel processing, light weight, small size, big load, greatly reduce the work intensity.

1.Sucker Rod Elevators are designed to handle sucker rods, heat-treated alloy steel bodies and forged steel ba

1.CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with *8 degree taper

1.The packer is a self-sealing packer, which mainly relis on the interference contact of the cup and the casin

1. At a high production rate, slotted pipe is milled under close tolerances, resulting in clean openings and c

1.The wells production debris is pumped through the no turn passing through the central hollow inner mandrel,

1.The tubing anchor effectively reduce rod, tubing, and casing wear. 2. This cuts operating costs. 3.Elimina

1.The Gas Separator was designed to provide a method of allowing gas to separate out of the solution and migra

1.The Tubing Centralizer also helps reduce the harmonics and vibrations caused by the Pump, potentially reduci

1.Class T and Class SM coupling for sucker rods are manufactured as per API *1B 2.Class T coupling is using A

1.We provide an oil well thermal recovery packer with simple structure, good sealing effect, safety and reliab

1.Model Y**1Compression Packer is a retrievable, Compression set packer, designed to hold pressure from below.

Couplings are short lengths of pipe used to connect 2 joints of tubing or casing. They come with painted co

Pup Joints are short lengths of tubing, and are used for spacing out downhole assemblies, as well as handling

Brief description The spring loaded pump stabilizer is designed to be run directly above the pump to restrict

The Tubing Drain allows for the tubing string to be drained prior to tripping, avoiding problems associated wi