Shaoxing Kostrong Autoparts Co., Ltd.

Arm Length (inches): 5.0, 6.0� Pin Size: 1-1/2"� Number of Te

number of teeth: 24� Tooth System: SAE 1 1/2''-10 C� Len

​1.High quality Four circuit protection Valve.� 2.Good process flow and cost

1.High quality Foot Brake Valve.� 2.Good process flow and cost effective.ï¿&

1. High quality Clutch Servo. 2. Good process flow and cost effective. 3. Applicable to Scania. 4.ï&iq

Material: Casting Steel� Color: Black� Number of teeth: 10ï&i

�Tralier air brake coils. 1.material: PA12, PA6, Pu. 2.Color: blue, red, yellow, black.

Stroke:64/64  Port thread:M16×1.5  Bolt thread:M16×1.5  Bolt centre:120.7&

1.standard versions made of zinc-plated steel, stainless steel or brass. 2.individual packaging according

number of teeth: 10  L1: 205  L2: 153  L3: 140  L4: 127  L5: 115 

Stroke:57  Port thread:M16×1.5  Bolt thread:M16×1.5  Bolt centre:120.7&nbs

Stroke:57/57  Port thread:M16×1.5  Bolt thread:M16×1.5  Bolt centre:120.7&

1.material: PA12, PA6, PA11 2.The size printed in bold type are to be given preference. 3.Nominal size

Arm Length:5-1/2" Number of splines:28 Spline Diameter:1-1/2" 1.It c

1.High quality Trailer Control Valve.� 2.Good process flow and cost effective.ï&iqu

1.High quality Relay Valve.� 2.Good process flow and cost effective.ï¿&frac1

1.High quality Hand Brake Valve.� 2.Good process flow and cost effective.ï¿&

Dimensions:120/14.0, 150/14.0, 180/14.0, 220/14.0, 250/14.0  Length:274  Number of Teeth:10 

Air dryer can control the booster air pressure by himself, than through the desiccant dry the water in the air

1.Forged steel. 2.26, 000 Inch Lbs. 3.Bi-directional design. 4.Press-out arm hole bushings. 5.Permanently