ConST132 Portable Hydraulic Pump

Descripción del producto

The Model ConST**2 Portable Hydraulic Pump is a dual pressure source with the ability to easily adjust and stabilize. This hand pump possesses both *0% vacuum and positive pressure ****0 psi; uses oil or deionized water as the media, and can adjust the pressure easily and stably. In order to avoid the enhance pressure seal ability, the ConST**2 didn’t use the check valve (non-return valve) but use the helicoidal pump, that makes the ConST**2 is very easy for pressurizing and is much better than other pliers hand pumps. The adjusting resolution is up to **0 Pa (1 mbar). These features make the CONST**2 ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.
Features
Can test big-cavity pressure gauges
Using helicoidal-pump to easy pressurize Easy operated,
much better than other pliers hand pumps.

CONNECTION
Direct connection
If the connector of the unit under test is M*0*1.5, please connect it with the hand pump directly.
Connect by pipe
If the connector of the unit under test is not M*0*1.5, please use the other adapter to connect.

SPECIFICATIONS
Media: Oil or deionized water
Generated Pressure Range: *3.5 psi (0.9bar) vacuum to ****0psi (**0bar) positive pressure
Pressure Resolution: **0Pa; 1 mbar
Material:
Ram/adapters: **6 SS;
Body: Steel/aluminum;
Seals: Buna-N.
Test Gage Connection: M*0*1.5; 1/2? NPT with included adapters.
Reference Gage Connection: M*0*1.5; 1/2? NPT with included adapters.
Dimensions:
Height: *3.*5? (**5 mm);
Base: **4.*7? (**0 mm) x *1.*0? (**8 mm).
Weight: 6.*2 lb (3 kg). 

PRECAUTIONS
Don’t attempt to connect the product to other pressurizing devices. Any high-pressure exceeded over the specified pressure of the pump, maybe cause an accident of some injury or damage to operator. Our Co. refuses to accept responsibility for the similar accident with person safety.

MAINTENANCE
1. After using, please cover it with a dustproof cloth.
2. If you can’t pressurize even no leakage status, that shows there isn’t any oil in the oil reservoir. Please loose the oil reservoir locknut “9” and move the cove “8” to add oil
3. Please rotate the release valve at vent statue when it is in using, close status when it is in transporting
4. If the oil reservoir is dirt, please turn on the locknut “9” and move the cover “8”, Swill the liquid out and inject the alcohol into the reservoir for cleaning. After that, inject the fresh oil media.
5. Please don’t tear down the joint parts from pump, that maybe effects the airproof performance of whole system and lead to the leakage problem.

Field-use calibration solution
ConST**1 Hydraulic hand pump
ConST**3 digital pressure calibrator
CST******0 flexible hose
Adapter of 1/2NTP,1/4NPT, M*0*1.5 
Spanners and kitbag