ConST117 Portable Pneumatic Pump

Descripción del producto

The Model ConST**7 Portable Pneumatic Pump is a dual pressure source with the ability to easily adjust and stabilize. This calibration pump possesses both *5% vacuum and pressure **0psi; uses air as the media, and can adjust the pressure easily and stably. Since it is attached inner gas-liquid isolator and shut-off valve (for releasing dirt), ConST**7 is totally free from humidity and dirt. Because ConST**7 is airtight and durable, it is entirely better than other pliers hand pumps more much. The adjusting resolution is up to *0Pa (0.1 mbar). These features make the CONST**7 ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments, especially for big cavity pressure gauge.
 Features
 Ideal pressure source for big cavity pressure gauge User friendly design,
makes it is better than other pliers hand pumps High air-tightness and lowest leakage,
Gas-liquid isolator results in free from humidity and dirt

CONNECTION
Direct connection
If the connector of the unit under test is M*0*1.5, please connect it with the hand pump directly.
Connect by pipe
If the connector of the unit under test is not M*0*1.5, please use the other adapter to connect.

SPECIFICATIONS
Media: Air.
Generated Pressure Range: *4psi (0.*5bar) vacuum to **0psi (*0bar) positive pressure
Pressure Resolution: 0.*1 Pa; 0.***1 mbar
Material:
Ram/adapters: **6 SS;
Body: Steel/aluminum;
Seals: Buna-N.
Test Gage Connection: M*0*1.5;
Reference Gage Connection: M*0*1.5
Dimensions:
Height: *5" (**0 mm);
Base: **4" (**5 mm) x *8" (**8 mm).
Weight: 6.*1 lb (3 kg).

PRECAUTIONS
1. Please don’t add any oil or water into the pipeline.
2. To avoid damaging the airproof surface, please don’t operate the shut-off valve aggressively.
3. This product can not directly calibrate pressure meters that are used under acid or alkali conditions. If necessary, you must make sure the meters are cleansed by CCl
4 Solvent or melted oil spray to avoid any corrosion damage to the test pump.

MAINTENANCE
Upon final installation of the Model CONST**7 Pressure Calibration Pump, no routine maintenance is required. A periodic check of system calibration is recommended. The Model CONST**7 is not field serviceable and should be returned if repair is needed (field repair should not be attempted and may void warranty). Be sure to include a brief description of the problem plus any relevant application notes. Contact customer service to receive a return goods authorization number before shipping.