clear epoxy resin AB adhesive for photo frame By Shenzhen Jinhua Electronic Materials Co., Ltd.,

clear epoxy resin AB adhesive for photo frame

Precio FOB

Obtener el precio más reciente

5 ~ 7 / Kilogram

4 Kilogram Minimum Order

País:

China

N º de Modelo:

312AB-6-N

Precio FOB:

5 ~ 7 / Kilogram (Negociable) Obtener el precio más reciente

Lugar de origen:

Precio de pedido mínimo:

5 per Kilogram

Cantidad de pedido mínimo:

4 Kilogram

Detalle de embalaje:

4KG/PKG

El tiempo de entrega:

3 days

Capacidad de suministro:

1000 Kilogram per Month

Tipo de pago:

Western Union, D/P, D/A, L/C, T/T

Grupo de productos :

Especificaciones del producto

Classification: Double Components Adhesives
Usage: Construction
Brand Name: jinhua

Descripción del producto

Epoxy resin **2AB**-N and be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-yellow, high transprancy, no ripple, bright in surface, it can be cured at room temperature or high temperature.

Application
**2AB**-N can be widely used for crystal photo frame, cross-stitch frame, painting frame, craft, ornament decoration, name plate, card, LED strip potting, blade, high quality LED channel letter, etc..

Properties before Hardening

Part	2A-N	2B-N
Color	Transparent	Transparent
Specific gravity	1.15	0.97
Viscosity (*5â„ƒ)	*0-*0CPS	**0 MAXCPS
Mixing ratio	A: B = *0:3(weight ratio)
Hardening conditions	5 â„ƒ×8H to 10H or 5â„ƒ×1.5H (2 g)
Usable time	5â„ƒ×40min (*0g)

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below *5 â„ƒ, please heat A glue to *0 â„ƒ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than *5%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than *5%, is not suitable for room temperature curing, suggest to use the heat curing.

Properties after Hardening

Hardness, shore D	<*6
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	*8
Volume resistivity, Ohm3	1x05
Surface resistance, Ohmm2	5X05
Thermal conductivity, W/M.K	1.*6
Induced electric loss, 1KHZ	0.*2
Withstand high temperature, â„ƒ	*0
Moisture absorption, %	<0.*5
Compressive strength, Kg/ mm2	8.4

País:	China
N º de Modelo:	312AB-6-N
Precio FOB:	5 ~ 7 / Kilogram (Negociable) Obtener el precio más reciente
Lugar de origen:	-
Precio de pedido mínimo:	5 per Kilogram
Cantidad de pedido mínimo:	4 Kilogram
Detalle de embalaje:	4KG/PKG
El tiempo de entrega:	3 days
Capacidad de suministro:	1000 Kilogram per Month
Tipo de pago:	Western Union, D/P, D/A, L/C, T/T
Grupo de productos :	-