Hot! Perfect anti-UV light clear epoxy adhesive for solar panel By Shenzhen Jinhua Electronic Materials Co., Ltd.,

Hot! Perfect anti-UV light clear epoxy adhesive for solar panel

Precio FOB

Obtener el precio más reciente

8 ~ 10 USD / Kilogram ( Negotiable )

15 Kilogram Minimum Order

País:

China

N º de Modelo:

2120A/B

Precio FOB:

8 ~ 10 USD / Kilogram ( Negotiable )(Negociable) Obtener el precio más reciente

Lugar de origen:

Precio de pedido mínimo:

8 per Kilogram

Cantidad de pedido mínimo:

15 Kilogram

Detalle de embalaje:

15kg each set

El tiempo de entrega:

3 days

Capacidad de suministro:

10000 Kilogram per Month

Tipo de pago:

T/T

Grupo de productos :

Especificaciones del producto

Classification: Double Components Adhesives
Usage: decoration
Brand Name: Jinhua glue

color:transparent

Descripción del producto

Epoxy Resin ***0AB
Feature
Epoxy resin ***0AB can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, anti-UV, high transprancy, bright in surface, it can be cured at room temperature or high temperature. ..

Application
***0AB can be widely used for solar panel surface, lamp potting and mould filling, etc..

Properties before Hardening

Part	***0A	***0B
Color	Transparent	Transparent
Specific gravity	1.15	0.96
Viscosity (*5â„ƒ)	*0-*0CPS	******0CPS
Mixing ratio	A: B = *0:0(weight ratio)
Hardening conditions	5 â„ƒ×6H to 8H or 5â„ƒ×2H (2 g)
Usable time	5â„ƒ×40min (*0g)

Operation
1.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.
2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below *5 â„ƒ, please heat A glue to *0 â„ƒ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.
3.When the relative humidity is higher than *5%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than *5%, is not suitable for room temperature curing, suggest to use the heat curing.

Properties after Hardening

Hardness, shore D	<*0
Withstand voltage, KV/mm	22
Flexural strength, Kg/mm2	*8
Volume resistivity, Ohm3	1x05
Surface resistance, Ohmm2	5X05
Thermal conductivity, W/M.K	1.*6
Induced electric loss, 1KHZ	0.*2
Withstand high temperature, â„ƒ	*0
Moisture absorption, %	<0.*5
Compressive strength, Kg/ mm2	8.4

Caution
1,The operating environment should be ventilative and should keep away from fire. Closely sealed after use.
2, Avoid eye contact,  in case of contact, wash with plenty of water and get medical attention immediately.
3, If contact skin, wrap with clean cloth or paper, and wash it with water and soap.
4, Keep away from children.
5, Please take a trial before application to avoid usage mistake.

Storage And Shelf Life
1, Store at the tempeture of *5°C or cool and dry place.  Avoid from sunlight, high tempeture or hign humidity enviroment.
2, Use up as soon as possible when opened. It is strictly forbidden to expose to the air for a long time after it is opened to avoid affecting the quality of the products. The shelf life is six months in the room tempeture of *5°C.

Notice: The above data is typical data measured by the laboratory environment under
the temperature of *5 â„ƒ, and humidity of *0%. For customers reference only.

País:	China
N º de Modelo:	2120A/B
Precio FOB:	8 ~ 10 / Kilogram ( Negotiable ) (Negociable) Obtener el precio más reciente
Lugar de origen:	-
Precio de pedido mínimo:	8 per Kilogram
Cantidad de pedido mínimo:	15 Kilogram
Detalle de embalaje:	15kg each set
El tiempo de entrega:	3 days
Capacidad de suministro:	10000 Kilogram per Month
Tipo de pago:	T/T
Grupo de productos :	-