Geogage

V.W. Total Pressure Cell is designed to measure pressure caused by filling pressure and loads of surrounding grounds. Technical Specification - Type

V.W. Strain Gage is designed to measure strain in structural members of temporary structures such as struts and piles. Technical Specification - T

V.W. Load Cell is designed to measure loads in struts and earth anchors. Technical Specification - Type : Vibrating Wire - Rated capacities : 30, 10

V.W. Rebar Stress Meter is designed to measure strain of slurry walls, concrete piles, Caissons, osterberg pile tests, others. Technical Specificatio

V.W. Read Out is designed to measure all of vibrating wire sensors. Technical Specification - Excitation range : 400Hz to 6, 000Hz - Resolution : 0.1

V.W. Piezometer is designed to measure drainage and water level for excavation of a braced wall, pore water pressure. Technical Specification - Type

V.W. Displacement Sensor is designed to monitor displacement or crack by fixing the mounting blocks on both sides. Technical Specification - Type : V

Magnet Extensometer is designed to monitor settlement or heave of bracing, foundations, dam, and soft soil ground. Technical Specification - Probe di

Tape Extensometer is designed to measure the change in distance between the walls of tunnels, in structures, or etc. Technical Specification - Type :

ABS inclinometer casing is a grooved tube for digital inclinometer probe to monitor the stability of embankments, slopes, etc. Technical Specificatio