Shanghai China Petroleum Instrument Co., Ltd

A platinum resistance is used to work as a temperature indicator, the corresponding relationship between Rt and T is listed in the below given table

Mud conductivity sensor is used to measure the conductivity within the mud, Refer to the manual book of the specific conductivity sensor being used.

CPS-YG Fluorescence Analyser adopts wave-length of 3650A ultraviolet spectrum to illuminate matters, which will reflect different flouresence's ph

In mud logging operation, the content of gas detracted from drilling fluid affects analyzing sample gas directly. The common floater or electric motor

The general Idea is that pressure vibrations are transmitted into a standard 4-20 mA DC output signals. SSP sensor Specifications: * SPP range: 0~40

A draw work sensor is consisted of one rotor and one stator and two subminiature hor pulse probes are embedded in the groove of stator 90 angle way. W

The controlled potential electrolysis principle is applied on the H2S sensor.Three electrodes installed in the electrolytic cell, which are workingele

WOH sensor is a pressure transmitter in fact. The general Idea is that Pressure Vibrations and transmitted into a standard 4-20 mA DC Output signals.

Electromagnetic Torque Sensor There are three types of torque sensors used in mud logging system, mechanical torque sensroe, electromagnetic sensor o

SPM/RPM sensor is an inductance device actually. The main idea is that when a metal stuff moving close to an inductor, signals are generated and count

In mud logging operation, the content of gas detracted from drilling fluid affects analyzing sample gas directly. The common floater or electric motor

CPS-YG Fluorescence Analyser adopts wave-length of 3650A ultraviolet spectrum to illuminate matters, which will reflect different flouresence's ph

A platinum resistance is used to work as a temperature indicator, the corresponding relationship between Rt and T is listed in the below given table

Mud conductivity sensor is used to measure the conductivity within the mud, Refer to the manual book of the specific conductivity sensor being used.

An Ultrasonic pit level sensor is an ultrasonic level monitor combining sensor and electronics in a single package. It is designed to measure liquid

The MFO Sensor is a target type flow meter. Based on the continuity principle of drilling fluid and bemoulli equation and the force analysis of the ba

WOH sensor is a pressure transmitter in fact. The general Idea is that Pressure Vibrations and transmitted into a standard 4-20 mA DC Output signals.

The controlled potential electrolysis principle is applied on the H2S sensor.Three electrodes installed in the electrolytic cell, which are workingele

Electromagnetic Torque Sensor There are three types of torque sensors used in mud logging system, mechanical torque sensroe, electromagnetic sensor o

SPM/RPM sensor is an inductance device actually. The main idea is that when a metal stuff moving close to an inductor, signals are generated and count

In mud logging operation, the content of gas detracted from drilling fluid affects analyzing sample gas directly. The common floater or electric motor

CPS-YG Fluorescence Analyser adopts wave-length of 3650A ultraviolet spectrum to illuminate matters, which will reflect different flouresence's ph

A platinum resistance is used to work as a temperature indicator, the corresponding relationship between Rt and T is listed in the below given table

An Ultrasonic pit level sensor is an ultrasonic level monitor combining sensor and electronics in a single package. It is designed to measure liquid

The MFO Sensor is a target type flow meter. Based on the continuity principle of drilling fluid and bemoulli equation and the force analysis of the ba