Izhar Steel

No matter what primary framing system is used, the building width is defined as the distance from outside of eave strut of one sidewall to outside of

The most common primary framing systems are shown below. All are shown symmetrical about the ridge line. Multispan Framing Systems with unequal width

The secondary members shall include Purlins, Girts and eave struts used to support the wall & roof cladding. Secondary members have certain functions.

Roof Panels are roll formed from 0.5mm (nominal) thick cold-rolled steel coated with an aluminum/zinc alloy (Zincalume). The material conforms to ASM

Panels are available in the below listed standard colors of Izhar Steel. Please refer to the Izhar Steel Color Chart, as actual colors may vary from t

IZHAR STEEL (PVT) LTD. offers its customers a variety of standard trims that provide a seamless finished look and style to the cladding of their pre-e

Mezzanine deck panels are roll-formed from cold-rolled galavanised steel.It is intended to carry only the dead load of wet concretes acting as a perma

Mezzanine deck panels are roll-formed from cold-rolled galavanised steel.It is intended to carry only the dead load of wet concretes acting as a perma

IZHAR Group was established by the late Engineer Izhar Ahmad Qureshi who earned highly reputed name in the veteran engineer's community of Pakista

Width: As per requirement Length: As per requirement Height: 18' Maximum Roof Sheet: Bare Zinc Alum Frame: Builtup I-Girder Uniform depth. (Circul