Tongyi International Plastics Machinery Co., Limited

motor makes the rotary blade on the shaft running, together with the stationary blade, the plastic is crshed into small pieces, smaller pieces goes th

the 1ton vertical plastic mixer best for plastic industry with stainless steel bucket and spiral leaf, effective and economy motor, big mixing capacit

The ceramic honeycomb dehumidifying rotor in the plastic industry Dehumidifying Dryeris made of ceramic fiber, together with the molecular sieve and s

continuously load the plastic automatically into the plastic molding machine, convenient and economy

the plastic molding temperature controller heats the water to the required temperature and push the heated water running in the mold and back to the c

drying the plastic material at set temperature for best molding effect, blower and heater makes hot air go through the material

refrigerant in the condensor and evaporator make the running water cooled down at the required set temperature, the cooling water into the molding mac

water heated by the plasitc molding temperature controller to the set temperature, pump push the water out and back into

capacity of 75kg, for 10-20oz molding machine, drying the plastics at set temperature to keep the plastics dry and avoid air bubble in the molding

200KG capacity satisfying the molding requirement, stainless steel bucket and detachable paddle for convenient clean, timer for automatic operation