Guangzhou DuroWelder Limited

1.UN3 Series Copper Tube and Aluminum Tube Butt Welding Machines is one kind of resistance butt welding equipment specially designed for Copper Tube a

Model/Item Rated capacity Rated primary voltage Rated frequency Maximum short current Electrode stroke Welding speed Electrode pressure Welding capabi

DN-100 Pneumatic AC Spot & Projection Welders Integrated single tube design of the Air Cylinder guarantees fast action and high repeatability

1.DC current welding by capacitance discharge, well welding quality and save power. 2.No welding black point, no need polish after welding.

1.IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost. 2.100% Duty cycle, continuous w

1.Welding of big and small gears of hard alloy saw blade; 2.Welding and annealing of spectacle frame and fitting; 3.Welding of jewelleries, clock and

1.This equipment adopts the IGBT inverter circuit in parallel connection, which has high load adaptability. 2.It has such features as high power, fast

Applications: Drill tip heat shaping Heat treatment Quenching;Forging Melting;Soldering and brazing

1. All kinds of dinnerware, cooking knivesand table knives; 2. Bicycle rim, motorbike rim, car rim, orsimilar strip rings; 3. Various metal wire and

2.Machine Working Process and Step Load the Sink Workpiece to the Fixing Jig of Working Table --- Start the Machine --- The Welding Electrode Rollers

Rated capacity Power input Maximum short current Rated duty cycle Maximum fastening force Maximum forging force External dimension Weight

Technical Parameters: Input voltage:AC220V/50HZ; Input current:16A; Output power:5000W; Min power:40W; Fluctuating :1.5MHZ; Operation mode:continuous;

1.Technical Data: 1.1Welding Range: Wire Mesh Max Width: 150-2200mm; Wire Mesh Max Length: 150-800mm; Cross Wire Diameter: 3.0-

.Machine Working Process and Step Load the Workpiece to the Fixing Jig of Working Table Start the Machine The Polishing Head and Workpiece Start to G

Generally speaking will design the Automatic Mesh Welding Machine specially according to the work piece shape, welding technology requirements, the si

UN5SeriesCopperandAluminiumFlashButtWeldingMachine, isonekindofCamTypeButtFlashWeldingMach...

UN2-50KVA *2 Series "T" Type Shelf Frame Double Heads Butt Welding Machine which is used for welding the T part of shelf frame There two trans

WBM Series Automatic Hydraulic Wire Bending Machine I.Main Feature This is a specially designed equipment for bending steel wire, it is widely

1.MOSFET and Inverting technologies of First generation been used; 2.Simple structure and light weight; 3.Simple to operate, A few minutes is enough t

Main Features: AutomaticArgonArc(Plasma)StraightSeamWeldingMachinemainlyincludestwoparts:speciallydesignedStraigh...

Item/Model Rated capacity Rated primary voltage Rated frequency Maximum short current Maximum welding input Rated duty cycle Arm length Maximum compr

TechnicalParameter Model IC-1HP IC-2HP IC-3HP IC-5HP IC-6HP IC-8HP IC-10HP IC-12HP IC-15HP IC-20HP IC-24HP IC-30HP IC-40HP CompressorRatedPower 1HP 2H

Type The input voltage The largest output power Fluctuating frequency The pressure of cooling water The main/ Extension weight The input water tempera

Model KIU-120AB Max Fluctuating Power 120KVA Fluctuating Frequency 10-30Khz Heating Current 100-5600A Work Voltage 3Phases*380V/ 50-60Hz The Range of

Main Technical Parameter Type KIU-30AB KIU-50AB KIU-65AB KIU-80AB KIU-100AB KIU-120AB Max Fluctuating Power 30KVA 50KVA 65KVA 80KVA 100KVA 120KVA Fluc

Main Feature: 1.AutomaticTubeMouthReducingMachineisspeciallydesignedtopreparetubesforButtweldingof&n...

1.This equipment adopts the IGBT inverter circuit in parallel connection, which has high load adaptability. 2.It has such features as high power, fast

Main characteristics: 1.IGBT module and Inverting technologies of third generation been used;Higher reliability and lower maintenance cost. 2.100% Dut

Machine Max Speed: 50-80Wires/Min Welding One Cross Wire Time: 0.5-0.8seconds(Depends on wire diameter, excluding labor and other external factors.) 1

1.Summary of the Welding Machine: The machine is mainly used for welding Bundy Tube Condenser automatically. After pre-cut the wire by automatic wire

Main characteristics: 1.IGBT module and Inverting technologies of third generation been used;Higher reliability and lower maintenance cost. 2.100% Dut

UN3 Series Butt Welding Machines It is one kind of resistance butt welding equipment specially designed for Copper Tube and Aluminum Tube Inserting

GenerallyspeakingwilldesigntheAutomaticMeshWeldingMachinespeciallyaccordingtotheworkpieceshape, weldin...

Main characteristics:1 IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost. 2

1.IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost. 2.100% Duty cycle, continuous

1.IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost. 2.100% Duty cycle, continuous

WBM-4-8MM Automatic Wire Frame Bending Machine which is used for Bending the cutted wire into the request refrigerator frame. It can bend 4pcs of wire

Because this kind of butt welding machine no need air compressor, simple operation, easy to move, stable quality, therefore widely used for the field

Main Feature: 1, MOSFET power apparatus are applied in our first generation current-changing control technology. 2, Small and light in weight 3, Simpl

.Machine Working Process and Step Load the Workpiece to the Fixing Jig of Working Table Start the Machine The Polishing Head and Workpiece Start to G