Xingtai Zhaohang Bearing Trading Co. LTD

The shape of the bearing seat is diamond flange type and the bolt hole on one side of the bearing seat assembly is round so that the shaft center can

The bearing housing structure is equipped with sliding grooves that allow free movement and can therefore be used in areas where the spacing between s

The shape of the bearing seat is square. It is mounted on the side wall of the machine by 4 bolts, etc. Due to the simple structure around the bearing

The bearing seat is diamond shaped and mounted with two bolts, which does not require a large space and is easy to install. They can be installed side

External spherical bearing with housing is a kind of bearing device that combines rolling bearing and housing together. The outer spherical bearing is

The shape of the bearing seat is circular. The bearing seat mounting surface is equipped with a tube end sleeve, designed to be pre-built on the oppos

A class with a slightly higher shaft center than the UCP200 type vertical housing housing. The shaft height dimension of the vertical housing bearing

The shaft and vertical section of the block bearing are made small and are suitable for use in the intermediate bearing of a screw conveyor. The beari

Compared to the UCP200 type vertical seat assembly, the mounting bolt holes have been changed to threaded holes due to the miniaturization of the bear

The main feature of these outer spherical ball bearings is that they have a certain degree of eccentricity at one end of the bearing and fit into an e