Descripción del producto
Concrete pile driving
equipment//Hydraulic Static Pile Driver Advantages
After *0 years of improvement by Changsha Tianwei Engineering Machinery Manufacturing Co., Ltd,
the Hydraulic Static Pile Driver has been developed into the current fourth generation,
and its main advantage reflects as below:
1. Patent technology
Patent No. ZL*******3.7:The design of inverted cylinder as supporting leg, which avoids
the radial force on the piston extends the life time of cylinder.
Patent No. ZL*******5.5: Embracing pile driving, top-pressing pile driving or both can
be achieved in the operation with one machine, which is applicable for concrete spum
pile,thick/thin-walled circular pile,square pile,steel H-pile,and other precast at the site of:
a) Clay, soft soil, sand layer, etc. b) Noise regulated urban area. c) Vibration
regulated areas, such as, near old buildings, precision instrument buildings, subway,
overpass,etc.
2. Structure and configuration
Big flow of hydraulic system: its piling speed is **0 m more than similar machine
per day.
Smaller pressure to ground than others: Tianwei pile driver is not easy to sink
and required not such good ground situation as others.
Well structured: Tianwei pile drivers supporting legs are easy to be dismantled
or installed; Good cutter block welded structure is not easy to crack.
Card board connection between horizontal movement mechanism and main machine body,
easy dismantling or installation. (Similar pile driver is connected with thread
structure, which is easy to deform, so its hard to dismantle or install.
Thicker and stronger at key parts: Tianwei pile drivers steel plate is thicker
than similar machine; its rid plates in vertical & horizontal motion mechanism
are denser and uneasy to crack than similar machine.
3. Clamping box technology
Tianwei pile driver has developed *6 cylinders clamping box for bigger model based on
8 cylinders clamping box for small model, and every clamp can self-adapt the orientation
according to the touch surface of the pile in order to guarantee there are enough touch
area, which can avoid pile slipping or damage, especially to some thin-walled circular
pile. It can not only clamp circular pile but also square pile.With the special design,
the clamping box wont be self-locked when loosing the pile and become much easier for
dismantling, installation or maintenance. (Normal pile driver with *6 cylinders can not
clamp square pile and self-locked too often, once breakdown only professionals can keep
in good repair to their complex structure.)
4. Corner piling technology
Directly move the center pile driving device to the corner piling position,
add on some counterweight, as a result of this technology, its pressure could
reach ****0% of center piling driving force. This structure of corner piling
device wont deform, and with the same style as center pile, it needs no extra
clamp. (Normal corner piling device is departed from the machine body, its
pressure reach only *0% of center pile driver. Its connection part is easily
deformed. The corner pile is limited under **0mm diameter of pile after extra
clamp, and its inconvenience to be transshipped, its clamp cannot be replaced
with center pile either.
5. Crane parts
Tianwei pile drivers crane arm is longer, rougher, more lifting pile power than similar
ones, and it is hard to deform.
6.Hydraulic and electricity parts
| País: |
China |
| N º de Modelo: |
ZYC500B
|
| Precio FOB: |
120000 ~ 250000 / ( Negotiable ) (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
120000 |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
main machine nude packed while key parts packed by plastic paper & tape and seal |
| El tiempo de entrega: |
30days after receipt of deposit |
| Capacidad de suministro: |
250 Set per Year |
| Tipo de pago: |
L/C, T/T |
| Grupo de productos : |
- |
