Yaohang PP Hollow Plastic Formwork for House Building

Descripción del producto

YaoHang PP Hollow Plastic Formwork Description
Yao Hang Hollow plastic formwork is a kind of energy-saving and green environmental protection product, pp plastic combined with macromolecule nano-technology. Concrete formwork is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. Plastic formwork for concrete is energy saving and environmental protection,and hollow plastic formwork can completely replace the traditional steel formwork, wood formwork, square wood, What's more, plastic formwork sheet amortization cost is very low.

Advantages of Hollow Plastic Formwork

1.Light Weight.
2.High strength,hardness,impact resistance-small check design.
3.Reuseable *****0times.
4.Easily install and removed, only tapping not releasing agent.
5.Waterproof,anti-high and low temperature

The Application of Plastic Formwork

The PP Hollow Plastic Formwork was widely used in construction projects,bridge engineering,assembly line tumover and other types of projects.
 

Install Details of Plastic Formwork for Concrete

1.Use the hollow building formwork intersecting surface laid with *5mm thick.
2.Wood square of the distance: (1) on the surface of the intersection (spacing: wood square distance according to the thickness of the slab concrete, in general, the thickness of less than 0.*5 m floor (spacing is **0 ~ **0 mm.(2) the shear wall (spacing according to adjust the spacing, height and thickness of the wall to wall height of ***0 mm, **0 mm thick wall, for example, using the formwork (*5 mm thickness spacing is **0 ~ **0 mm, if the shear wall, pillar width more than 1 meter, must add the fixed frame.

3.Die shear wall and column puzzle when leaving no gaps, internal Angle (the bottom of the wall) parts must have wood square, beam, wall, formwork connection.Shear wall made 4 after the mold must be assembled into the whole hoisting, then lay flat, reduce labor intensity, forming effect is good.
4. When the nail to the formwork from the formwork edge distance *5 ~ *0 mm, strength wants moderate, nail nails is *0 ~ *0 mm in length, shoulds not be too long or too short.
5.Beam bottom of a piece of wood square must set aside *5 mm seam allowance, wallboard made on wood square seam allowance, it does not leak slurry and wallboard material saving.

The Parameter of Hollow Plastic Formwork

FAQ

1.Q: Are you a factory or trading company?

A: We are a factory of plastic formwork.

2.Q: How can I get some samples?

A: We are honored to offer you free samples.

3.Q: How does your factory control quality?

A: Quality is priority. We always control from the very beginning to the end , from the raw materials to the production. Every batch of materials, we must test the quality about the impact stength , Vicart , bending strength. Our factory has gained ISO***1:***8.

4.Q: How many times does your formwork reused?

A:It can be reused over *0 times.

5.Q: Does this formwork stick concrete? and easily remove or not?

A:It doesn't stick concrete and easily remove, even no need any release agent, only tapping can fallen off.

6.Q: How to clean the used formwork?

A: Only using the high-pressure water gun can make it clean.

7. Q: what are your foreigh markets?

A: Middle East countries, Africa countries, the eastern European countries,Oceania countries
 

Contact US

 If you are in demand of Hollow Plastic Formwork,please do not hesitate to contact with us.

Whatsapp:**6 **********6

Wechat:blue*********1

Mobile:**6 **********8