Precio FOB
Obtener el precio más reciente|
- Minimum Order
País:
Saudi Arabia
N º de Modelo:
00
Precio FOB:
Lugar de origen:
ksa
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
-
Detalle de embalaje:
-
El tiempo de entrega:
-
Capacidad de suministro:
-
Tipo de pago:
-
Grupo de productos :
-
Saudi Arabia
Persona de contacto Mr. Mamdouh
Second Industrial City, Dammam, Other
DESCRIPTION:
T-ULTRATHERMA range is a general use polymer modified bituminous
waterproofing membrane. The compound developed from good quality
resins blended with high quality Straight/penetration grade
Bitumen & special additives to enable as suitable product to
weather resistance, waterproofing application. It is specially
formulated & designed for low temperature areas use to
protect the substrate from heavy cold weather deterioration, this
is ensured by in house tests for enhanced Performance to show
very good cold flexibility, Impermeable to water.
FEATURES:
*Good weather resistance properties.
*High build compound ensures stability of the product.
*Good elongation & recovery properties.
*Adequate flexibility at cold temperatures.
*Superior bonding to concrete, masonry substrates and at
seams.
REINFORCEMENT &SURFACE FINISH
It is produced with **0 gm /m2 Spunbond
non-woven polyester.
Polyester core to have high value of tensile strength
Elongation, Tear strength & Lap joint strength.
The membranes are produced in 3mm, 4 mm
thickness standard length *0 meter and width is
1 meter wide.
Top side TAJ Logo printed P.E Film with Embossed surface
Bottom side plain P.E Film covering
USES:
T-ULTRATHERMA
app bitumen membranes are Torch Applied & ideal for general
roofing, waterproofing application. On low slope concrete roofs,
weather protection layer on roof sheet, multi car parks,
foundation concrete underlayment Waterproofing, sewage work and
any cemented, concrete flat surface requires waterproofing.
APPLICATION:
Surface must be free from oil, grease, tiny debris particles and
nails. Give a coat of TAJ Bitumen Primer on the cleaned Concrete
substrate at the rate of ******0 gm/m2.The
primer must be allowed to dry completely before application of
the membrane.
T-ULTRA
THERMA APP membranes are fixed by torch
welding.
The method is easy to the trained Applicator.
The membrane rolls are lined up and spread open over the area to
which they are to be laid once the rolls are laid, so that the
next overlaps.
The first by *0 cm alongside lap. The membrane is then rolled
back without changing origin, it is then unrolled again while
heating the underside carefully and sufficiently to form melted
compound .End of roll joints should overlap a min.*5 cm.
Avoid uneven and excessive torching on surface. The lap joints
can be heated from top side to produce thin bed melt compound at
the seam, which can be smoothened by trowel to ensure properly
welded joint
TECHNICAL DATA T-ULTRATHERMA
| PROPERTIES | TYPICAL VALUES | TEST METHOD | ||||||||||||||||||||
|
Thickness nominal ,mm |
3mm, 4 mm |
ASTM D
**1 UEAtc |
||||||||||||||||||||
| Roll length | *0 meter | |||||||||||||||||||||
| Roll width | 1 meter | |||||||||||||||||||||
|
Penetration [*] @********************ong> |
*9 – *4 |
ASTM D 5 |
||||||||||||||||||||
| Softening point deg.C | ******2 max | ASTM D *6 | ||||||||||||||||||||
| Water absorption [Wt] % | < 1% | ASTM D **0 | ||||||||||||||||||||
Heat resistance
Productos relacionados Taj International for InsulationProductos relacionadosSend a direct inquiry to this supplierGet Verified Buyers & SuppliersAvail Free Consultation |
