Precio FOB
Obtener el precio más reciente( Negotiable )
|1 Piece Minimum Order
País:
China
N º de Modelo:
JB2722M
Precio FOB:
( Negotiable ) Obtener el precio más reciente
Lugar de origen:
Guangdong, China
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
1 Piece
Detalle de embalaje:
20*14.7*8cm
El tiempo de entrega:
in stock
Capacidad de suministro:
500 Piece per Week
Tipo de pago:
PayPal, Western Union, L/C, T/T
Grupo de productos :
Persona de contacto Ms. Flora
Gangxingchuangyedasha,Shangtun New Village,Heshuikou,Gongming Town,Guangming New District, Shenzhen, Guangdong
Stepper Motor Driver JB***2M AC******0V 7.0A **0Microstep
Features
High performance, low price
*6 channels constant angle and constant torque microstep, max revolution is up to *0,**0 pulse/R
Driving current can be adjusted from 1.2A/phase to 7.0A/phase through *6 channels
Upmost response frequency amounts to **0Kpps
Once the pulse stops over **0ms, the phase current will be automatically reduced to half of pre-set current
Opto-isolated signal Input/Output
Single power , voltage range: AC******0V
It can match 2 phase hybrid stepper motors whose current is under 7A, flange size ranges from *6mm to **0mm.
Wiring example
Current setting
The working current of the driver is set by DIP*1
terminal, for more details please refer to the diagram
below.
Microstep
setting
The microsteps of the driver are set by DIP*2 terminal with the
following *6 channels. They are set separately by the first 4 of
the 6 DIP-switch.(The other 2 are for function setting). Details
are as below: Microsteps(pulse/R)
!
Caution
1. The voltage can not exceed AC**0V.
2. The pulse signal effects on falling edge
3. ALM lights and the driver stops working when the driver temperature is over *5?. Until the temperature falls to *0?, it will restart to work after powered-up. The heat sink is needed when overheat occurs
4. ALM lights if it is short circuit, please check motor leads and eliminate other short faults, and then repower up to restore
5. ALM lights if the motor does not connect well with the driver, please check motor leads and repower up to restore
| País: | China |
| N º de Modelo: | JB2722M |
| Precio FOB: | ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | Guangdong, China |
| Precio de pedido mínimo: | - |
| Cantidad de pedido mínimo: | 1 Piece |
| Detalle de embalaje: | 20*14.7*8cm |
| El tiempo de entrega: | in stock |
| Capacidad de suministro: | 500 Piece per Week |
| Tipo de pago: | PayPal, Western Union, L/C, T/T |
| Grupo de productos : | stepper motor driver |
