Precio FOB
Obtener el precio más reciente( Negotiable )
|1 Piece Minimum Order
País:
China
N º de Modelo:
JB3722M
Precio FOB:
( Negotiable ) Obtener el precio más reciente
Lugar de origen:
Guangdong, China
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
1 Piece
Detalle de embalaje:
20*14.7*80cm
El tiempo de entrega:
in stock
Capacidad de suministro:
500 Piece per Week
Tipo de pago:
PayPal, Western Union, T/T
Grupo de productos :
Persona de contacto Ms. Flora
Gangxingchuangyedasha,Shangtun New Village,Heshuikou,Gongming Town,Guangming New District, Shenzhen, Guangdong
Stepper Digital Driver JB***2M AC******0V 7.0A **0 Microsteps Matching 3phase stepper motor size *6mm, **0mm and **0mm
Features
?High performance, low price
?*6 channels constant angle and constant torque microstep, max revolution is up to *0,**0 pulse/R
?Driving current can be adjusted from 1.2A/phase to 7.0A/phase through *6 channels
?Upmost response frequency amounts to **0Kpps
?Once the pulse stops over **0ms, the phase current will be automatically reduced to half of pre-set current
?Opto-isolated signal Input/Output
?Single power , voltage range: AC******0V
?It can match 3 phase hybrid stepper motors whose current is under 7A, flange size ranges from *7mm to **0mm
?Phase memory function (Note: Once the stops over 3 seconds, the driver will memorize the motor phase automatically so that it can restore the phase automatically when it is repowered or MF signals change from low level to high level.)
Wiring and
Dimension example
Current
setting
The working current of the driver is set by DIP*1 terminal, for more details please refer to the diagram below. (Note: the value is RMS)
Microstep
setting
The microsteps of the driver are set by DIP2 terminal with the following *6 channels. They are set separately by the first 4 of the 6 DIP-switch.(The other 2 are for function setting). Details are as below: Microsteps(pulse/R)
Input signal
timing diagram
Terminal
function
!
Caution
1. The voltage can not exceed AC**0V .
2. The pulse signal effects on falling edge
3. ALM lights and the driver stops working when the driver
temperature is over *5?. Until the temperature falls to *0?, it
will restart to work after powered-up. The heat sink is needed
when overheat occurs
4. ALM lights if it is short circuit, please check motor leads
and eliminate other short faults, and then repower up to
restore
5. ALM lights if the motor does not connect well with the driver,
please check motor leads and repower up to restore
| País: | China |
| N º de Modelo: | JB3722M |
| Precio FOB: | ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | Guangdong, China |
| Precio de pedido mínimo: | - |
| Cantidad de pedido mínimo: | 1 Piece |
| Detalle de embalaje: | 20*14.7*80cm |
| El tiempo de entrega: | in stock |
| Capacidad de suministro: | 500 Piece per Week |
| Tipo de pago: | PayPal, Western Union, T/T |
| Grupo de productos : | motor driver |
