Precio FOB
Obtener el precio más reciente|
1 Set Minimum Order
País:
China
N º de Modelo:
-
Precio FOB:
Lugar de origen:
China
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
1 Set
Detalle de embalaje:
carton
El tiempo de entrega:
15 days
Capacidad de suministro:
5000 Set per Month
Tipo de pago:
T/T
Grupo de productos :
Persona de contacto Ms. libby
Zhejiang, Hangzhou, Zhejiang
split pressurized solar water heater
The split solar water heating system is such a system that separates the heat collector from the water tank, and transfers the solar energy collected by the heat collector to the water tank through the natural or forced cycle of medium to make water hot.
Characteristics
1.The
heat collector and water tank are separated, and the system
works under pressure.
2.Intelligent controller to assure the system runs
automatically.
3.The storage water tank could be placed in any place of the room.
4.The solar collector could placed anywhere such as the balcony, southern wall, sliding roof, etc.
5.The water tank is placed indoors and it is in favor of reducing the heat loss of water tank.
6. You can have hot water *4 hours per day.
Components:
1. Heat pipe solar collector (solar thermal collector)
2. Pressurized storage tank, Water tank capacity: **0 L;**0L; **0L; **0L; **0L; **0L; **0L; **0L; **0L
3. Working station
Heat Pipe vacuum tubes Brief Indtroduction
Evacuated tube with copper pipe, and there is anti-freeze liquid inside as medium transfering heat.
1. Diameter and length: *8mm / ***0mm
2. Glass material: Borosilicate glass 3.3
3. Tube thickness: 1.6mm or 2.0mm
4. Resistant hail: *5mm or *8mm
5. Life span: *5 years to *0 years
Heat pipe solar collector brief information
1.vacuum tube size: *8****0
2. stand frame:quality galvanized steel
3.insulation layer:polyurethane foam *5mm thickness
4.quantity of heat pipe tubes in a collector: from *0 pieces to *0 pieces
5.working pressure:0.6Mpa
6.life span: *5 to *0 years
Pressurized storage tank brief introduction
1.inner tank:1.5mm SUS****2B stainless steel
2.outer tank:0.5mm color steel
3.copper coil heat exchanger: red copper diameter *2mm
4.insulation layer:polyurethane foam
5.rated pressure:0.7Mpa
6.accessories: T/P valve, Mg anode, electric heater
País: | China |
N º de Modelo: | - |
Precio FOB: | Obtener el precio más reciente |
Lugar de origen: | China |
Precio de pedido mínimo: | - |
Cantidad de pedido mínimo: | 1 Set |
Detalle de embalaje: | carton |
El tiempo de entrega: | 15 days |
Capacidad de suministro: | 5000 Set per Month |
Tipo de pago: | T/T |
Grupo de productos : | Split pressurized solar water heater |