Precio FOB
Obtener el precio más reciente100 ~ 600 / Set ( Negotiable )
|10 Set Minimum Order
País:
China
N º de Modelo:
IRA-HP58/1.8-20
Precio FOB:
100 ~ 600 / Set ( Negotiable )Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
100 per Set
Cantidad de pedido mínimo:
10 Set
Detalle de embalaje:
carton
El tiempo de entrega:
20days
Capacidad de suministro:
100000 Set per Week
Tipo de pago:
D/P, D/A, T/T
Grupo de productos :
Persona de contacto Wendy
undefined
Heat pipe pressurized solar water heater features:
1.Adopts the best conduction performance metal- heat
pipe (copper).
2.Can be used all year round in the cold climate.
3.High efficiency, rapid warming. Heat pipe in vacuum tube could
transfer hot energy to cold water in pressurized solar water heater
tank rapidly.
4.The whole pressure of the system is up to 1.5kg/M2, the inlet
could connect the tap water directly, the max pressure can be
0.6Mpa.
5.No water in the tube, one tube broken don't influence the system
working.
6.The design for inner tank is reasonable and scientific, which
could hold **0, **0 times fatigue test without any damage.
7.Dual-purpose brackets for both flat and inclined
roof.
8.The system is pressurized, it keep a constant temperature of water in the tank, avoid the problem came from water level controller malfunction which could cause water flow out.
Pressurized solar water heater working principle:
1.The pressurized solar water heater tank has no exhaust hole, therefore, it must bear the pressure came from tap water. The hot water comes out because of water pressure.
2.Vacuum tube absorbs solar energy, and conductive copper pipe transfers the heat into the pressurized solar water heater tank. In this case, the water inside the tank becomes hot.
3.No water in the heat pipe makes the whole system could bear pressure.
Model |
IRA-HP*8/1.***0 |
Material of out tank |
0.*1mm thickness color steel/ fluorine carbon steel |
Material of inner tank |
Food grade 1.0 mm thickness SUS**4 stainless steel |
Tank insulating layer |
*0mm thickness, *5kg/m³ high-density polyurethane foamed |
Inlet and outlet hole |
Female G 3/4 |
Max pressure |
0.9Mpa |
Solar collector tube |
3.3 Borosilicate glass with Al-SS/Cu coating *8x1,**0mm with heat pipe |
Thickness of glass tube |
1.6mm |
Vacuum tube tightness |
P≤0.**5 Pa |
Absorption |
as=0.***0.*6(AM1.5) |
Emission ratio |
εh=0.***0.*6(*0C±5C) |
Idle sunning property parameters |
Y=**0~**0m2.C/KW |
Average heat loss coefficient |
ULT=0.6~0.7W/(m2.C) |
Bracket |
1.2mm thickness of galvanized steel material,*8degree |
Structure of tank: |
6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor. |
Welding: |
Argon arc welding |
Fastening pieces: |
Made of stainless steel screw |
Absorber area |
1.**4m² |
Heat pipe size |
Dia*4mm x *0mm length condenser,**0cm length in total |
Heat pipe material |
TU1 copper |
Heat pipe power |
>**0W/pcs |
Temperature tolerance |
from **5C to **0C |
Tube quantity |
*0 tubes |
Other Tube quantity |
8/*0/*2/*5/*8/*0/*4/*0/*6 tubes |
Tank capacity |
**0L |
Other Tank capacity |
*0/**0/**0/**0/**0/**0/**0/**0/**0L |
País: | China |
N º de Modelo: | IRA-HP58/1.8-20 |
Precio FOB: | 100 ~ 600 / Set ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | China |
Precio de pedido mínimo: | 100 per Set |
Cantidad de pedido mínimo: | 10 Set |
Detalle de embalaje: | carton |
El tiempo de entrega: | 20days |
Capacidad de suministro: | 100000 Set per Week |
Tipo de pago: | D/P, D/A, T/T |
Grupo de productos : | Heat pipe pressurized solar water heater |