Descripción del producto
The
product can automatically manage the work of Solar Panel and
battery in Solar System, which is below **0W (*2V) or below **0W
(*4V).
FUNCTION:
1. over-load
protection   2.short circuit protection
    3.reverse discharging
protectionÂ
4.reverse-polarity
protection Â
         Â
5.protection from the lightning strike.
  6.under-voltage
protection            Â
7.over-charging protection
II.
CONNECTION (AS INDICATED IN DIAGRAM):
Open
the top cover of controller; connect the wire and terminals of
controller according to the drawing on the top cover of
controller.
1.
Connect the “+â€, “- †Poles of the battery to the correct
ports of controller (the third and the fourth one from
left).
*If load indicator (mark: load)
flickers once and starts lighting after *0 seconds, you can tell
the connection is correct; the following operation can be proceed,
otherwise, the following operation may damage the
controller.
2. Connect the “+â€, “- †Poles
of the solar panel to the correct ports of controller (the first
and the second one from left).
*Incorrect connection may
damage.
3. Connect the “+â€, “-†Poles
of the load to the correct ports of controller (the fifth and the
sixth one from left).
III.
INDICATOR LED
             1.
The battery is being charged strongly when the Charge LED is
lighting; flickering means the battery is in floating charge mode,
if it’s off means charging stopped.
             2.
When the Load LED is lighting, it means there is output and load
can work; if it’s off, there isn’t output and the load cannot
work.
Notice:
             1.
Please make sure the rated voltage of solar panels, batteries the
loads are same and are all *2V or all *4V.
             2.
The rated current of solar panels and load must be less than the
rated current of controller.
The
Specifications:
|
Rated voltage
|
*2V or *4V
|
Voltage of stop power
supply
|
**0.8V or *1.6V
|
|
Rated charging current
|
*0A
|
Voltage of resume power
supply
|
**1.8V or *3.6V
|
|
Rated load current
|
*0A
|
Voltage of stop charging
|
**4V or *8V
|
|
Working temperature
|
**0 ~ **0℃
|
Temperature coefficient of voltage
stop charge
|
*3mV/℃/cell
|
|
Dimension (L*W*H)
|
**1×*5×*5
mm
|
Net weight
|
**0g
|
Parameters may customized by
customers.
| País: |
China |
| N º de Modelo: |
CMP12/12V/24V 10A
|
| Precio FOB: |
(Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
- |
| Detalle de embalaje: |
- |
| El tiempo de entrega: |
- |
| Capacidad de suministro: |
- |
| Tipo de pago: |
T/T |
| Grupo de productos : |
- |
