Descripción del producto
SOLAR CONTROLLER
(non waterproof)
User’s manual
The
product can automatically manage the work of Solar Panel and
battery in Solar System,which
is below **0W (*2V) or below **0W (*4V).
FUNCTION:
1. over-load
protection 2.short
circuit protection
3.reverse discharging
protection 4.reverse-polarity
protection
5.protection from thelightning
strike. 6.under-voltage
protection
7.over-charging protection
II.
CONNECTION (AS INDICATED IN DIAGRAM):
Open
the top cover of controller; connect the wire and terminals of
controller according to the drawing on the top cover of
controller.
1.
Connect the “+”, “- ” Poles of the battery to the correct ports of
controller (the third and the fourth one from left).
*If load indicator (mark: load)
flickers once and starts lighting after *0 seconds, you can tell
the connection is correct; the following operation can be proceed,
otherwise, the following operation may damage the
controller.
2. Connect the “+”, “- ” Poles of the
solar panel to the correct ports of controller (the first and the
second one from left).
*Incorrect connection may
damage.
3. Connect the “+”, “-” Poles of the
load to the correct ports of controller (the fifth and the sixth
one from left).
III.
INDICATOR LED
1.
The battery is being charged strongly when the Charge LED is
lighting; flickering means the battery is in floating charge mode,
if it’s off means charging stopped.
2.
When the Load LED is lighting, it means there is output and load
can work; if it’s off, there isn’t output and the load cannot
work.
Notice:
1.
Please make sure the rated voltage of solar panels, batteries the
loads are same and are all *2V or all *4V.
2.
The rated current of solar panels and load must be less than the
rated current of controller.
The
Specifications:
|
Rated voltage
|
*2V or *4V
|
Voltage of stop power supply
|
**0.8V or *1.6V
|
|
Rated charging current
|
*0A
|
Voltage of resume power supply
|
**1.8V or *3.6V
|
|
Rated load current
|
*0A
|
Voltage of stop charging
|
**4V or *8V
|
|
Working temperature
|
**0 ~ **0℃
|
Temperature coefficient of voltage stop
charge
|
*3mV/℃/cell
|
|
Dimension (L*W*H)
|
**1×*5×*5
mm
|
Net weight
|
**0g
|
Parameters may customized by
customers.
| País: |
China |
| N º de Modelo: |
CMP12
|
| Precio FOB: |
65 / Acre (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
shenzhen |
| Precio de pedido mínimo: |
65 per Acre |
| Cantidad de pedido mínimo: |
10 Acre |
| Detalle de embalaje: |
- |
| El tiempo de entrega: |
- |
| Capacidad de suministro: |
2000 Acre per Day |
| Tipo de pago: |
- |
| Grupo de productos : |
energy
|
