Descripción del producto
INJECTION PUMP/GROUT
Product Characters: Light, only 7kg,
easy to carry and maintain, can do self-maintenance on the
working places. The biggest pressure can reach ****0PSI. The
medicament also can inject into tiny cracks and pores.
Working Positions: Outside walls of
basements, plate leaking sealing, second joints and cracks, top
boards leaking sealing, pillars and walls epoxy
strengthening.
Use Method: Drilling holes on
leaking/strengthening positions. Lock pinhead tightly. Pour
medicament into material cup. Turn on switch, squeeze out left
cleaning agent or lubricant from material cup and hose till
medicament spraying out. Insert pinhead, inject medicament into
walls for leaking sealing and strengthening.
Operation instructions:
1 make sure the switch of the electrical driving drill is on R
direction.
2. the electrical driving drill is not hammer drill, so do not
operate it like hammer drill.
3. make sure the screws and nuts do not come off; the pressure
hose and the switch value is tightly connected.
4. adjust the rotate speed of the electrical driving drill to the
maximum, turn on switch of the electrical driving drill. And then
plug in wire line. When it is connected to power, do not turn of
the electrical driving drill switch.
5. there is a hexagonal copper cap screw between axes and pump(*7
spanner) and there is a thick Teflon washer inside. It is for
leaking proof. If the medicament come out here when you are using
the pump, please adjust the screw.
6. the maximum pressure could be ****0PSI, make sure the pressure
durability of waterproof injection packer is good enough.
Otherwise it may be dangerous.
7. The high pressure injection pump can injection epoxy. When you
use it to inject epoxy, make sure you will finish injecting work
within the set time(epoxy can be harden within a short time). If
the temperature of epoxy is rising, stop working at once and then
wash the pump with cleanser. Make sure the pump is clean,
otherwise it may be blocked by the epoxy.
8. Do not use medicament with granule, such as epoxy mortar.
9. After working, please clean the pump with special cleanser for
two or three minutes. And then keep some cleaner leftover in the
pump to avoid blocking because of the medicament leftover.
| País: |
China |
| N º de Modelo: |
SL-605
|
| Precio FOB: |
(Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
China |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
1set/carton |
| El tiempo de entrega: |
10days |
| Capacidad de suministro: |
1000 Set per Day |
| Tipo de pago: |
T/T |
| Grupo de productos : |
high pressure injection machine series
|
