Descripción del producto
This pump is a compressed air
driver pump used to transfer the refrigerant from the refrigerant
tank to the refrigerant charging machines in case that they are
far apart.
The compression ratio is 3.*5 times the
compressed air pressure.
This transfer pump has a dual
effect refrigerant cylinder, driven by a dual effect air
cylinder.
The refrigerant pipes are
terminated with check valves for the correct working, and a
manometer is located close to the output quick connection in
order to check the output pressure.
A safety overpressure valve is
present on the output side in order to recirculate the gas in
case of misoperations in compressed air adjustment.
In the compressed air circuit is
present a pressure regulator with the relevant manometer, in
order to adjust and check the correct operation of the unit. A
lubrication unit is used to lubricate only the air cylinder, in
order to guarantee the correct movement.
A special filter is located at the
output side of the air cylinder driver valve. This is to avoid
that the nebulized oil goes out from the silencers. The residual
oil is collected in the bottom part of this filter. The user has
only to check the level regularly and remove the oil when the
level is too high.
It is important to guarantee the
correct liquid gas supply to the transfer pump. Make sure the
inlet piping is correctly dimensioned. It is a correct procedure
to add a gas filter in the inlet line, to guarantee that no dirty
can go inside the pump, causing problems in its operation.
For additional information, please
contact us immediately.
| País: |
China |
| N º de Modelo: |
PTP
|
| Precio FOB: |
(Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
- |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
- |
| Detalle de embalaje: |
- |
| El tiempo de entrega: |
- |
| Capacidad de suministro: |
- |
| Tipo de pago: |
- |
| Grupo de productos : |
- |
