Descripción del producto
This pump is a
compressed air driver pump used to transfer the refrigerant from
the refrigerant tank to the refrigerant charging machines in case
that they are far apart.
The compression ratio
is 3.*5 times the compressed air pressure.
This transfer
pump has a dual effect refrigerant cylinder, driven by a dual
effect air cylinder.
The refrigerant pipes
are terminated with check valves for the correct working, and a
manometer is located close to the output quick connection in
order to check the output pressure.
A safety overpressure
valve is present on the output side in order to recirculate the
gas in case of misoperations in compressed air adjustment.
In the compressed air
circuit is present a pressure regulator with the relevant
manometer, in order to adjust and check the correct operation of
the unit. A lubrication unit is used to lubricate only the air
cylinder, in order to guarantee the correct movement.
A special filter is
located at the output side of the air cylinder driver valve. This
is to avoid that the nebulized oil goes out from the silencers.
The residual oil is collected in the bottom part of this filter.
The user has only to check the level regularly and remove the oil
when the level is too high.
It is important to
guarantee the correct liquid gas supply to the transfer pump.
Make sure the inlet piping is correctly dimensioned. It is a
correct procedure to add a gas filter in the inlet line, to
guarantee that no dirty can go inside the pump, causing problems
in its operation.
For
additional information, please contact us
immediately.
| País: |
China |
| N º de Modelo: |
Polo AT40FL Series
|
| Precio FOB: |
(Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
PR China |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
1 Piece |
| Detalle de embalaje: |
- |
| El tiempo de entrega: |
- |
| Capacidad de suministro: |
5 Piece per Day |
| Tipo de pago: |
- |
| Grupo de productos : |
- |
