NPCC-602 FOR ADHESIVES AND SEALANT

Descripción del producto

Our NPCC***2 for adhesives and sealant is characterized by small and even particle size, big surface area, and low in DOP adsorption and moisture content, etc. It is widely used in PU, adhesive, silicone adhesives, automotive sealant and so on.

Advantages as follows:

1. Low moisture content and close to pH neutral and good in chemical stability, there is no reaction with cure exposy in adhesives.

2. High dosage can be added, hence greatly reduce cost.

3. Reinforcing property mechanical properties (hardness and compression strength), heat transfer, heat resistance, adhesion and corrosion resistance can be increased, contraction rate and expansion coefficiency can be lowered, can be increased. In addition, it can lend lubricating property to adhesives and improve process, hence obtain overall improvements.

4. Small particle size and high specific surface area; coating used to treat NPCC***2 has a good compatibility with adhesive; it can function as ,thixotropic agent.

5. NPCC***2 is very easy to be colored and has no negative effect on product color.

6. NPCC***2 shows different modification property in different adhesives.

        *-It improves rehology behavior in PVC plastisol;

        *-Strength and abrasion resistance are increased in silicone structure adhesive;

        *-Reinforcing and heat resistance are better in hot melt adhesive;

        *-Water-based adhesive becomes thicker and more sticky

Technical Data Sheet