medals and awards

Descripción del producto

STEP 1 Stamping Molding
Molds the metal surface to form the design.

STEP 2 Outline Cutting
* Cutting molds are made separately, then cut to the exact outline of the design. * Additional outline cutting molds may be required depending on the complexity of the design. * If a center hole or cut-out is required, an additional cut-through mold must be used.

STEP 3 Attachment
Solder attachment onto the back of each piece.

STEP 4 Plating
Plating now can be processed. The quality of plating varies with the length of time the metal is soaked in the plating liquid.

STEP 5 Polishing
The metal surface is then polished until it is smooth and shiny. This applies to copper material only. Iron can be polished if required, but this will incur a surcharge.

STEP 6 Coloring
* Soft enamel is carefully inserted by hand, one color at a time, using different sized syringes. * Drying. * To prevent defects, a high degree of skill is required in order to keep each color and the correct amount of enamel in the proper area.

STEP 7 Cleaning
Excess col or and impurities are then wiped off the metal surfaces.

STEP 8 Baking
The metal piece is baked at approximately **0F for*2 to *5 minutes.

STEP 9 Epoxy Coating
Clear epoxy is then applied to the surface to protect the enamel from color fading and cracking. ( Epoxy coating is optional and provided according to customer’s requirements )

STEP *0 Inspection & Packing
All it ems are strictly inspected before delivery. Customer’s satisfaction is guaranteed!