Precio FOB
Obtener el precio más reciente0.65 ~ 2.21 USD / Piece ( Negotiable )
|10000 Piece Minimum Order
País:
China
N º de Modelo:
Liquid Nail Adhesive NO.1
Precio FOB:
0.65 ~ 2.21 USD / Piece ( Negotiable )Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
0.65 per Piece
Cantidad de pedido mínimo:
10000 Piece
Detalle de embalaje:
330ml plastic cartridge or customized
El tiempo de entrega:
About 35 days for first cooperation
Capacidad de suministro:
2500 Ton per Day
Tipo de pago:
T/T, L/C, D/P
Grupo de productos :
Persona de contacto Ms. Evergain
No 529, 7th Petrochemical Road, Gaolan Port Economic Zone, Guangzhou, Guangdong
v High Strength Construction Adhesive
v Super adhesion strength, can bond almost all construction materials
v Super adhesion strength and fixing
v Excellent weather resistance and cold resistance
v Good flexibility and no embrittlement
v More convenient, Safe guaranteed
v High adhesion strength and fast to dry
v 1 square centimeters of nail free adhesive can withstand *4kg items
Introduction:
Evergain free nail adhesive has super adhesion strength. It replaces nails at the utmost. Without drilling holes on the surface, the adhesive can fix and bond wood, door & window, gypsum board, MDF, stone, ceramic tile, metal, plastic, rubber, etc.
Characteristics:
1.Super initial strength and bonding strength;
2.Wide application: it can bond most substrates, and even wet wood;
3.Flexible, weather resistance, water proof, and no influence by moving the material;
4.No sinking, can be used to fill and can be painted after dry;
5.No containing of toluene, benzene or other hazardous material;
6. Chemical corrosion resistance, cold resistance, and high temperature resistance.
Storage: Shelf life: *4 months
Usage:
1. Clean the surface of the material and make sure it is grease free.
2. Cut the mouth of the tube, put the nozzle and squeeze out with the sealing gun;
3. Dry-type bonding method: for light weight or light pressure-bearing material. Squeeze out the adhesive by linear shape, and make the gap *0cm between each row. Press the joint by the adhesive side, pull apart after the adhesive volatilize several minutes, and then press tight the two sides.
4. Wet-type bonding method: for heavy weight material. Paint the adhesive as same as the above method. Clamp the two sides with plier, iron nail or screw. After the adhesive is dry (about *4 hours), remove the plier. The adhesive can be moved within *0 minutes after bonding. It can be more fixed after 2 ~ 3 days, and to be best after 7 days.
Attention:
1. The adhesive can be cleaned before it is solidified. After it is dry, the outside stain can be scraped or removed. And also it can be used when floor.
2. The bonding strength will be weakened under high temperature. Do not bond the metal that is exposed under the sunlight.
Warning:
1. The adhesive is dangerous product. Put in the dry and cool place. The working environment must be well ventilated, and far away from high temperature and resource of ignition.
2. The product should be put out of reach of children. Avoid contacting with eyes. Do not dump into the sewer. In case of mis-swallowing, send to hospital immediately, and show the product container or label.
3. If happens to be dazed when use, please go outside for fresh air or go to hospital.
4. In case of contact with eyes, please wash the eyes with clean water for *5 minutes, and then go to hospital immediately.
País: | China |
N º de Modelo: | Liquid Nail Adhesive NO.1 |
Precio FOB: | 0.65 ~ 2.21 / Piece ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | China |
Precio de pedido mínimo: | 0.65 per Piece |
Cantidad de pedido mínimo: | 10000 Piece |
Detalle de embalaje: | 330ml plastic cartridge or customized |
El tiempo de entrega: | About 35 days for first cooperation |
Capacidad de suministro: | 2500 Ton per Day |
Tipo de pago: | T/T, L/C, D/P |
Grupo de productos : | Liquid Nail Adhesive |