Precio FOB
Obtener el precio más reciente1.9 ~ 4.6 / Set ( Negotiable )
|100 Set Minimum Order
País:
China
N º de Modelo:
Epoxy Sealer No.1
Precio FOB:
1.9 ~ 4.6 / Set ( Negotiable )Obtener el precio más reciente
Lugar de origen:
China
Precio de pedido mínimo:
1.9 per Set
Cantidad de pedido mínimo:
100 Set
Detalle de embalaje:
1. 400ml/set, 20sets/Carton 2. Quantity of 20ft container: 1242cartons
El tiempo de entrega:
About 35 days for first cooperation
Capacidad de suministro:
2500 Ton per Day
Tipo de pago:
T/T, L/C, D/P
Grupo de productos :
Persona de contacto Ms. Evergain
No 529, 7th Petrochemical Road, Gaolan Port Economic Zone, Guangzhou, Guangdong
1. Anti-mildew, waterproof, non-yellowing,
2. Suitable for complicated colorful pattern
3. Good acid and alkali resistance, stain resistance
4. High compressive strength, good abrasion resistance
5. Green environmental protection, no volatile odor
6. Easy to maintain, cleanable to the original
color.
1. All kinds of cabinets aperture,
window, furniture, etc
2. All kinds of edges of Kitchen, toilet, also can be used to paste
all kinds of hard materials
3. Bathtub, shower room, glass partition, implement, lavabo, mesa
and basins of guesthouse
4. Hotel, family, such as the installation of sanitary ware,
waterproof, plugging and decoration processing.
1.
Preparation
Tile decoration grout, injection dispenser, texture paper, knife,
gap cleaning awl, edge pressing ball, water scraper, materials
scraper, etc.
2.
Processing
(1)
Cleaning the tile gap and stick the texture paper
Keep about 3mm groove and 2mm width pf the tile gap, with the paper
on both sides, must keep the crossing area clean, stick the texture
paper close to the gap;
(2) Put
the cartridge into the dispenser
Press the to pull the rod out and open the cartridge to keep
the opening upside, screw the mixer to the opening, then put the
cartridge into the dispenser. The opening of the mixer can be
adjusted by cutting to fit the gap sizes. (smaller than the
gap.)
(3) Start
to process
At the beginning, need to remove the first mixed grout, about *0cm,
for a new hand, suggest to inject ****0cm for practice, then
increase the length accordingly. Smoothen the grout by using water
scraper, edge pressing ball and even finger. If still any grout
remain inside the dispenser, lay it flat-wise. Need a materials
scraper to hold under the opening of the mixer. If find any uneven
place, keep injection. After all gaps of the paper smoothened,
remove the paper and keep in stand for *4 hours.
Rich and bright color can meet all decoration needs.
País: | China |
N º de Modelo: | Epoxy Sealer No.1 |
Precio FOB: | 1.9 ~ 4.6 / Set ( Negotiable ) Obtener el precio más reciente |
Lugar de origen: | China |
Precio de pedido mínimo: | 1.9 per Set |
Cantidad de pedido mínimo: | 100 Set |
Detalle de embalaje: | 1. 400ml/set, 20sets/Carton 2. Quantity of 20ft container: 1242cartons |
El tiempo de entrega: | About 35 days for first cooperation |
Capacidad de suministro: | 2500 Ton per Day |
Tipo de pago: | T/T, L/C, D/P |
Grupo de productos : | Ceramic Tile Sealer |