Lifting Hoist 10ton European style low headroom wire rope electric hoist

Descripción del producto

Working class is M4~M7, and pulley group multiplying power is 2/1,4/1,4/2,6/1,8/1 and 8/2 etc.

Installation of electric hoist is classified into low building height single*-track trolley type ( D model, applied single track and single-girder cranes), double*-track trolley type (S model, applied to double*-girder cranes), and fixed type ( G model). Traveling speed is 2~*0m/min with stepless frequency conversion, and standard lifting speed 5/0.8m/min. Also frequency conversion is adopted to make the electric hoists steady lifting and braking, as well as lifted weights small swing. Precise positioning gets operation greatly improved.



 

Lifting motor of  European Low Headroom Wire Rope Electric Hoist

Squirrel cage type asynchronous motor ( synchronous speed to ***0 rpm )

Double speed or frequency conversion stepless speed regulation

Heavy grade system, load duration rate *0%&*0%ED

Class F insulation, protection grade IP*5

Lifting Gear Box                                                                                    

• Sealed gearbox housings are made of aluminum                         

• Totally enclosed semi-fluid, lifetime designing

• Helical type, hardened and ground gears.

Lifting Brake of  European Low Headroom Wire Rope Electric Hoist 

• DC Electromagnetic disc brake

• No adjusting requirement for brake lining, maintenance free  

• Motor and brake working together, brake torque is at least 1.8 times higher 

• than the nominal torque of the motor, not slip at any point of starting or 

stopping of the hoist or lower motions

• Fully covered, dust proof

• Heavy duty brake

• Adjustable brake toque

• Brake linings are asbestos-free

• Super life time, 1 million normal brakings, **0 emergency Brakes. 

Rope Drum of  European Low Headroom Wire Rope Electric Hoist 

• Large diameter rope drum Dd/dr=*6, and rope pulleys extend the ropes lifetime 

• Min. two dead rope turns while the hook is in the lowest position

• Rope guide is wear resistant, heavy-duty, made of spheroidal graphite cast iron

• A spring operated guide roll in the rope guide prevents slack rope

Hook Of  European Low Headroom Wire Rope Electric Hoist

• DIN ****0 standard Hook, quenched and tempered *4CrMoV steel

• anti-friction lifetime lubricated bearings and rotate freely **0 degrees

• Spring-loaded sturdy safety catch, ensuring slings not release

Rope guide

• full cover cast iron rope guide

• correctly guide wire rope

• avoid wire rope strand loosening a dangerous situation

• can withstand in the scope of the small angle inclined 

Safety feature                                                                   

• Overload protection: equipped self re-setting overload protector, the hoist motion is 

• stopped if overloading occurs, but lowering is permitted, making the crane safe

• Lifting limit switch: adjustable, geared *-step rotating limit switches, 

self re-setting, 

• slow down and stop

• End stop: energy-absorbing rubber buffers

• Wireless anti-collusion limit switch: infra-red type 

• Overheating protection: equipped with imbedded bi-metallic thermal switch(or thermistors) 

• in the windings to protect against overheating

• Electrical braking is provided in all circumstances and the mechanical brake as standby