Descripción del producto

- Fast location for ground fault in different DC systems
- Strong anti-interference when system is working online
- Innovative dual-range current detector with direction sensitivity
- Multi-way for location: Current direction, signal strength & phase angle

Why K****6?
Cost can be tremendous upon bad insulation or grounding in the power system. It may even cause power break-off which is costly to repair. Therefore, fast localization and elimination of grounding faults will be significant for electricians and technicians. It is also required by DIN VDE *******0 (VDE *******0): ******6 chapter **1.6.3.1 and IEC *********1 chapter **3.1.5.4. K****6 is developed to fast detect, track and locate virtual grounding faults on DC systems. This spares you from hours of unnecessary troubleshooting and helps to increase the reliability of your electrical equipment. It is widely used in locomotive, telecom, power utilities, etc
 
Feature
- Patented technology, pinpoint current leakage fault with grounding resistance lower than **0kΩ
- Innovative dual-clamp for signal receiver, each clamp has two sizes of opening jaw for different conductors
- One pair of clamp working together, effective cancel capacitive interference when DC system is online
- Precise current direction (positive or reversed) indicating for leaking current help fast locate the faulty grounding
- *0Hz output frequency on signal receiver effectively avoids interference from DC system itself
- Signal receiver can set reference in different points for signal comparison, very fast for fault orientation
- Digital signal processing technology for detecting grounding resistance and capacitive resistance
- With built-in band pass filter to bypass different interference signals in the ambient environment.
- No disconnection of the electrical installation, ground fault location is carried out during operation
- Frequency spectrum analysis can test ambient frequencies, which helps analyze the surrounding environment.
- Signal generator with adjustable output voltage (*4V~***0V) for different DC systems
- Multi-ways to indicate ground fault: sensitive current direction, phase angle, comparison of signal strength.