INK INJECTOR

Descripción del producto

Outline dimension:      φ*0***0mm                        
Minimun quantifying unit:0.***2CC                             Function:Controlling thickness of ink layer
CP**0 Ink Injector (Precise type) main technical date:
Model dimension Minimum unit mark
CP**0 φ*0×**0mm 0.***2CC *0MM=0.*6g(one circle)
（figure 5）
1.Before cleaning, make sure all the ink in the
container all wringed out. Then screw off the
container cover and screw the knob matrix to
the top of the fixed shaft. As shown in figure five.
（figure 6）
2、follow figure 5, screw the ink container
parts off (note: it has a small gap as
shown in the small circle of figure 6).
When open it, separate the ink container
and fixed shaft along with the gap. As
shown in figure six.
Pay attention to the force when separate r in order not to damage the internal components.
3、Then screw off each parts and clean them with white gas or petrol.
After cleaning, assemble each part to the right position. Be
careful to use and maintenance.
III、