Inductrial hot forging machine/forging furnace/billet heat treating machine/metal process machine

Descripción del producto

Induction heating power are the generators of machines in heating, brazing, forging, melting, hardening and heating treatment applications.

General introduction MF series: frequency range (0.***0KHZ) is suitable for the penetrating heat of shafts and rods and other type metal parts for heat treatment or forging or metal melting. MF melting furnace and MF forging furnace are the two most widely application in heating systems now.

Main applications of medium frequency induction heating heater
Medium frequency machines are usually used in the penetration heating occasions, for example, rod heating for forging rod end heating
Melting of almost all kinds of metals
Heating of stators or rotors for fitting
Heating of tube end for extrusion
Heating of moulds deep quenching of shafts and gears tempering or preheating of weld joint and so on

Main Specifications of MF heaters
 

1. voltage feedback design and adopt IGBT based LC series resonance circuit 
2. IGBT inversion technology ,high energy conversion over *7.5%
3. energy saving **-*0% compared with SCR technology. In series resonance circuit, induction coil with high voltage and low current,
4. **0% duty cycle , *4 hours continuous working ability at maximum power. 
5. less harmonic current and high power factor. Power factor always remaining 0.*5 above during machine running.
6. the frequency tracking automatically technology enables power factor to remaining high level throughout heating process. 
7. Good reliability, IGBT is a self turn-off transistor that ensures inversio