Copper induction coils heating system/induction heater/ induction heating machine/heat treatment power supply for metal forging machine

Descripción del producto

Induction heating power are the generators of machines in heating, brazing, forging, melting, hardening and heating treatment applications.

General introduction MF series: frequency range (***0KHZ) is suitable for the penetrating heat of shafts and rods and other type metal parts for heat treatment or forging or metal melting. MF melting furnace and MF forging furnace are the two most widely application in heating systems now.

Main applications of medium frequency induction heating heater
Medium frequency machines are usually used in the penetration heating occasions, for example, rod heating for forging rod end heating
Melting of almost all kinds of metals
Heating of stators or rotors for fitting
Heating of tube end for extrusion
Heating of moulds deep quenching of shafts and gears tempering or preheating of weld joint and so on

Main Specifications of MF heaters
 

1. All-solid-state IGBT frequency conversion and power adjustment, soft-switching resonance dual-control and frequency automatic tracking technology is the reliability of guarantee. 
2. Module and soft switching inverting technologies are used in the production of the generator, higher reliability can be achieved;
3. Small size and portable, compared with SCR controlled machine, only 1/*0 working space is needed, greatly reduce occupation space;
4. High efficiency and energy saving: a high power factor and power efficiency within the scope of full power.
5. With wide frequency range from ***0KHZ automatic tracking ability, no need adjustment at scene. 
6. **0% duty cycle , *4hours continuous working ability at maximum power. 
7. Constant output voltage or power control modes are alternative;
8. Full display of output power, output frequency, output voltage and current.
9. The timer function: heating time and retaining time: 0.1~*9.9second.
10. Simple operation, easy installation: connect the machine to 3 phase **0VAC and cooling water system only.
11. Timer can be chosen to present and adjust the heating time, heating power, retaining time, retaining power respectively to control the heating curve and heating temperature.