Heat-insulation Energy-saving coatings

Descripción del producto

Main performance parameters:

The index name

The performance parameters

appearance

Blue liquid (bicomponent)

The main ingredients

GTO nano insulation

Thermal insulation: infrared barrier

At ***0nm is more than *9%; *5% or higher at **0 nm

PH

7.0 + / - 0.5

The proportion of

0. 9 g/cm3

Transparency: visible light transmittance

*5% or higher

Uv barrier

*9% or higher

hardness

5 to 6 h

adhesion

Level 0

Noise is reduced

****0 db

The thickness of the coating

**3 microns

Membrane service life

*0 years

The construction area of

*0 m2 / L

Main applications:

Used for building glass energy-saving renovation, reduce energy consumption.

Used for building glass, solar glass, glass curtain wall, advanced hotels, hotels, office buildings, private houses, exhibition hall to improve comfort and efficiency.

Glass insulation and uv protection for cars, trains, planes, ships and other means of transport to improve comfort and efficiency

For indoor need to block and screen uv glass.

Method of use;

Clean the glass before construction and dry the surface without water before construction.

Mix part A and part B in proportion according to the requirements of the product specification, and let it ripen for ****0 minutes before use.

Prepare the sponge scraping tools and dipping trough, pour the paint into the clean dipping trough, dip the appropriate amount of paint first and then scratch the bottom.

After mixing component A and component B, it is better to use them within 3 hours, otherwise the viscosity of the coating may increase and it is not easy to use.

Matters needing attention:

1. Selection of construction surface:

Single glass: both indoor and outdoor.

Double glazing should be done outside.

2. Transportation preservation method:

The product should be kept in the shade as much as possible.

The ambient temperature is from *5 to *5 degrees for three months.

The ambient temperature is from 5 to *5 degrees for 6 months

3. Applicable base material:

Transparent glass, transparent acrylic, transparent PET, transparent PP

When you use it, protect it from the mouth and eyes.

Packing specification;

1/2/*0 L