Precio FOB
Obtener el precio más reciente79 ~ 89 USD / Piece ( Negotiable )
|50 Piece Minimum Order
País:
China
N º de Modelo:
ZR-60W CO2 laser power supply
Precio FOB:
79 ~ 89 USD / Piece ( Negotiable ) Obtener el precio más reciente
Lugar de origen:
jinan china
Precio de pedido mínimo:
79 per Piece
Cantidad de pedido mínimo:
50 Piece
Detalle de embalaje:
carton and foam
El tiempo de entrega:
3-4 working days after payment received
Capacidad de suministro:
4000 Piece per Month
Tipo de pago:
T/T, D/A, D/P, Western Union
Grupo de productos :
-
Persona de contacto william
Jinan, Shandong
ZR**0W CO2 POWER SOURCE
Feature:
1.The HV laser power supply has stable
laser output. Each *0W laser power supply have been much
more rigorous testing procedures, under full load high temperature
(*2~*5 degrees Celsius) *4 hours of aging to ensure high
stability of each carbon dioxide laser power
supply.
2.
The **0V laser power supply's control is easy and
simple. It adopts high or low level control, the TTL-level
control makes laser beams
output start and stop quickly.
3.
This.*0W laser power supply uses imported USA,Japan,German,France
and Taiwans
high quality components for major parts to avoid the error in
future and strengthen lifetime. The carbon dioxide laser power
supply can be widely used to drive ***0mm or ***0mm
*0W CO2 laser tube made by different
factories.
4. This **0V inpuit laser power supply's
main advantage is high frequency,quick response speed, less volume,
less weight, easy operation with complete protecting
function.
5.The HV laser power supply has the
protection switch. Laser power control is simple, it can
use 0 - 5V analog signal or PWM (pulse width
modulation) signal to adjust and control laser
powers
output.
6. The carbon dioxide laser power supply
has LCD display module: (optional) .Because of it, it do
not need to open the outside case. Operator can simply find
ordinary code faults and output current at LCD display screen of
**0V laser power supply and easy remove the
trouble. Also the output current can be adjusted by potentiometer
on the LCD module
7.The *0W laser power supply has
excellent protection function. The carbon dioxide laser power
supply has open circuit protection, which
make the **0V laser power supply short-term
work in the open circuit status which avoid the laser tube burst
due to the damage caused by HV laser power supply. In this way
it greatly enhancing the *0W laser power
supplys service
time.
8.This ZR**0W CO2 laser power supply uses
ordinary H/L/P/G/IN/5V ports to accept laser power's
control signal and galvanized steel case.
Specification
| lnput | Input voltage | AC**0V±*0% (AC**0V specified while order) | ||
| AC frequency | *7~**0HZ | |||
| Maximum power | **0W | |||
| Maximum current | 2.2A | |||
| Output | Maximum output voltage | *5KV | ||
| Maximum output current |
*8mA (depending on the laser tubes of different manufacturers) |
|||
| Efficiency | More than *0% (Full load) | |||
| Response speed | Not more than 1ms | |||
| Control lnterace | TTL multilevel switching control,effective level can be high and low selection (see control wining diagram) | |||
| Insulation | lnput-output | AC ***0V 1 minutes not more than *0mA | ||
| lnput-shell | AC ***0V 1 minutes not more than*0mA | |||
| Output-shell | Connection | |||
| Open Circuit Protection | Can be short circuit (requires a good grounding shell,while avoiding the positive electrode and the shell between the arc) | |||
| Environmental Requested | Working temperature | **0℃~*0℃ | ||
| Storage of temperature | **0℃~*5℃ | |||
| Relative Humidity | Maximum *5%RH (non-condensing) | |||
| Altitude |
**0,**0
feet of work **0,**0 feet of storage,dose not work |
|||
| Cooling methods | Forced air cooling (fan cooling) | |||
| Dimensions (LxWxH) | **0mmx**5mmx**2mm | |||
| País: | China |
| N º de Modelo: | ZR-60W CO2 laser power supply |
| Precio FOB: | 79 ~ 89 / Piece ( Negotiable ) Obtener el precio más reciente |
| Lugar de origen: | jinan china |
| Precio de pedido mínimo: | 79 per Piece |
| Cantidad de pedido mínimo: | 50 Piece |
| Detalle de embalaje: | carton and foam |
| El tiempo de entrega: | 3-4 working days after payment received |
| Capacidad de suministro: | 4000 Piece per Month |
| Tipo de pago: | T/T, D/A, D/P, Western Union |
| Grupo de productos : | - |
