Descripción del producto

Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the inter plate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates. Product description Cross Reference ALFA LAVAL model M*0B / M*0M Applications:General heating and cooling duties. Heating by means of steam. Typical capacities Liquid flow rate: Up to *0 kg/s (**0 gpm), depending on media, permitted pressure drop and temperature program. Maximum heat transfer surface M*0B: *0 m2 (**0 sq. ft) M*0M: *0 m2 (**0 sq. ft) Plate type:High theta and Low theta,parallel flow. Water heating by steam: 0.7 to 3.0 MW STANDARD MATERIALS Frame plate: Mild steel, Epoxy painted Nozzles: Carbon steel Pipe: Stainless steel, Titanium Plates: Stainless steel **4,**6,Titanium,C**6. Thickness:0.5mm,0.6mm Gaskets (Clip-on): Nitrile, EPDM, FKM,VITON Other grades and material available on request. Particulars required for quotation - Flow rates or heat load - Temperature program - Physical properties of liquids in question (if not water) - Desired working pressure - Maximum permitted pressure drop - Available steam pressure