Precio FOB
Obtener el precio más reciente|
500 Kilogram Minimum Order
País:
India
N º de Modelo:
nil
Precio FOB:
Lugar de origen:
India
Precio de pedido mínimo:
-
Cantidad de pedido mínimo:
500 Kilogram
Detalle de embalaje:
1 Kg Bucket
El tiempo de entrega:
15 DAYS
Capacidad de suministro:
-
Tipo de pago:
Other
Grupo de productos :
-
India
Persona de contacto Kartheesan
F5 III Phase SYMTEC TOWER, Chennai
ECOANTICORR 1 A Geo Polymer based pre mixed anti-corrosive protective coating formulated to prevent the corrosion. It has excellent bonding strength to steel and all other surfaces comparing to conventional anti corrosive coatings. It forms an excellent corrosion barrier against severe corrosive mediums. ECOANTICORR 1 bonds both Chemically & Mechanically with Steel & Concrete and hence highly durable. It is used in Anticorrosive coating of
Steel Surfaces |
Reinforcing bars |
Concrete |
FEATURES
Chloride, Sulphate and Carbon Dioxide Resistant
Acid (>3pH), Alkali and Fire Resistant
Un-matched Bonding to both Steel & Concrete
Quick Setting, No priming and No curing required
Extends the life of structure
Non-Toxic formulation and Contains no VOCs (Volatile Organic Compounds)
Eco-friendly Material (Does not contain resin / epoxy / cement)
Premixed, Easy to use, Just add water
TECHNICAL DATA
Form |
Powder |
Color |
Grey |
Mixed Density |
Around 2.*0 Kg/Ltr |
Final Setting Time (at *0°C) |
*0 Minutes |
Bond Strength with Concrete |
3 MPa |
Bond Strength with Steel |
5 MPa |
Compressive Strength |
*5 MPa |
Flexural Strength |
4 MPa |
Coverage |
Average consumption is 1.5 – 2.0 Kgs /m2 for 2 coats |
SURFACE PREPARATION
The steel surfaces to be coated shall be free from loose rust particles, oil, grease and materials which reduce bonding. Cleaning shall be done by sand blasting or by using hard wire brush.
The concrete to be coated shall be free from laitance, dust, loose material, surface contamination and materials which reduce bonding.
If the surface temperature is too hot, sprinkle water / wet the surface to bring down the surface temperature to ambient condition. Apply the coating as soon as the surface becomes dry.
MIXINGGUIDELINES (at *0°C)
Add **0ml of water to 1Kg of powder and mix thoroughly for 3 minutes. Initially the mix may appear dry but keep mixing and the material will dissolve to form brushable consistency slurry. Apply the mixed slurry by brush onto the cleaned surface.
SITE TEMPERATURE |
MIXING TIME * |
§ Mixing times are based on using *0â—¦ |
País: | India |
N º de Modelo: | nil |
Precio FOB: | Obtener el precio más reciente |
Lugar de origen: | India |
Precio de pedido mínimo: | - |
Cantidad de pedido mínimo: | 500 Kilogram |
Detalle de embalaje: | 1 Kg Bucket |
El tiempo de entrega: | 15 DAYS |
Capacidad de suministro: | - |
Tipo de pago: | Other |
Grupo de productos : | - |