DIY effect image laser stage lighting TD-GS-13

Descripción del producto

Accessories:
1, a 2 laser light, AC adapter, a 3 manual 1 4, SD Card 1
Note:
1, in strict accordance with procedures described in the instruction manual operation, do not disassemble lamps.
2, the product is only suitable for indoor use, and to ensure that water, moisture, shock, do not use in dusty environments.
3, based on semiconductor laser characteristics, the working environment required temperature *5 ~ *0 ℃, continuous two hours later, take off lights for *0 minutes, the laser will cool down completely.
4, to prevent foreign matter into the body, so as not to cause trouble.
5, do not frequent at the beginning, so as not to affect the life of the laser light and to avoid prolonged open.
6, to avoid the observation of laser equipment used afar, this may increase the risk.
7, once again transport, please note that earthquake, it is best to use the original packaging.
Warning:
1, the laser light risk rating for the CIass lllA, to observe directly in the beam is dangerous.
2, the lamp on the power requirements of ******0V*****0Hz, if out of this range, it is recommended to use voltage regulator device, otherwise it will seriously affect the laser life.
Disclaimer:
The products in the factory has been comprehensive and rigorous testing, the user should strictly comply with the above stated warnings and operating instructions, due to misuse of any product damage caused is not within the scope of our warranty, which led to the neglect of manualfailures and problems are not within the scope of the dealer responsible for any action on the human body generated by the laser damage, the company responsible.
Specifications:
Power: AC adapter AC******0V/****0Hz, output **5 V ***0mA/*5V **0mA
Laser - Wavelength: **2nm (green), **0 nm (red), **5nm (violet)
Size: **5.5X**1X**2.5mm
Product Weight: 1.*8KG/PC