Precio FOB
Obtener el precio más reciente4000 / Piece
|1 Piece Minimum Order
País:
China
N º de Modelo:
Zirconium Reactor
Precio FOB:
4000 / Piece Obtener el precio más reciente
Lugar de origen:
-
Precio de pedido mínimo:
4000 per Piece
Cantidad de pedido mínimo:
1 Piece
Detalle de embalaje:
wooden case
El tiempo de entrega:
20 to 30 days
Capacidad de suministro:
50000 Ton per Year
Tipo de pago:
-
Grupo de productos :
Persona de contacto Leo
No.1818,SunTangBei,RD,Cixi, Ningbo, Zhejiang
Stainless steel clad
plate
As an advanced new material, the stainless steel clad plate fully
realizes the complementary advantages of materials which both show
decay resistance, abrasive resistance, diamagnetism and
decorativeness of composite material, and exhibit good weldability,
moldability, ductility and thermal conductivity of base material.
Application of this material can significantly improve strength,
rigidity and impact load strength, reduce weight of structural
members, decrease costs significantly while ensuring technical
requirements, and this material is a new generation energy
conservation and environmental protection product.
1. Executive standard of stainless steel clad plate: refer to
GB/T8165-2008 Stainless Steel Clad Plate and Steel Strip
2. Product specification: thickness: 3mm≤ thickness ≤50mm, wherein thickness of cladding layer 0.5mm～5mm, basic layer thickness ＞2.5mm, width 1,500mm～2,400 mm and length ＜15,000mm.
3. Product type: common base materials: Q235A(B), Q345A(B), 20g, 20R, 16MnR, etc.
Common cladding materials: 0Cr13, 1Cr13, 0Cr17, 0Cr18Ni9, 0Cr18Ni10Ti, 1Cr18Ni9Ti,
4. Feature of stainless steel cladding plate:
(1) Binding rate: no less than 99%
(2) Mechanical property
| Interface shear strength Jb,Mpa≥ | Yield point σs, Mpa | Tensile strength σb, Mpa | Ductility δ, % | Impact toughness Akv, J |
| 210 | Not less than standard value of base layer steel plate | Not less than standard value of base layer steel plate and not greater than ceiling limit value 35Mpa | Not less than standard value of base layer steel plate | Should comply with requirements for base layer steel plate |
（3）Processing property
| Thickness, mm | Flexural center d | excurvation, incurvation, 180º |
| ≤20 | 2a | No layering and crack |
Note: a stands for total thickness of clad steel plate.
5. Delivery state: deliver after hot rolling, heat treatment or polishing.
6. Specific application scope: raw coal hopper of power plant, pressure vessel, storage tank, reactive tank, desulfuration equipment, anti-corrosion pipeline, water tank, etc.
7. Stainless steel clad plate specification, type and application
| País: | China |
| N º de Modelo: | Zirconium Reactor |
| Precio FOB: | 4000 / Piece Obtener el precio más reciente |
| Lugar de origen: | - |
| Precio de pedido mínimo: | 4000 per Piece |
| Cantidad de pedido mínimo: | 1 Piece |
| Detalle de embalaje: | wooden case |
| El tiempo de entrega: | 20 to 30 days |
| Capacidad de suministro: | 50000 Ton per Year |
| Tipo de pago: | - |
| Grupo de productos : | Composite Metal |
