Descripción del producto

AutoScrubWashMitt is our most versatile Nanoskin and will replace the need for a clay bar by easily and safely removing surface contamination. This new process is much quicker than using the traditional clay bar and you will get the same great clean surface upon completion. 

The microfiber mitt has a special rubber polymer coating on one side that actually loosens and removes particles that are stuck to the clear coat. This advanced rubber polymer technology will help remove tree sap, water marks residue, rail dust, road grime and other extra difficult surface contaminants with ease. Always wash the vehicle first as you normally would do to remove the loose contamination. Dry the vehicle and then use theAutoScrub wash mitt along with a clay lubricant like our Wonder Lube to go over the surfaces to remove the surface pollutants. 

When using the AutoScrub Wash Mitt you will be amazed at how fast the advanced rubber polymers safely separate and remove contaminants bonded to the vehicle exterior. This means your paint will be exceptionally clean and you can effectively now apply a polish, glaze, sealant or wax afterwards. Use the wash mitt not only on the paint, but the glass, trim moldings, plastics and much more. If you would happen to drop it on the ground, no worries, just rinse the AutoScrub clean with water and its ready to be used again unlike the traditional clay bar! 

The NanoSkin AutoScrub Wash Mitt get the job done while during the wash up stage.This is one of the most effective ways to deep clean your paint in a very short time period. 

Our Medium Duty NanoSkin AutoScrub Wash Mitt is best used on vehicles with heavy contaminant build-up.

Our Fine Duty NanoSkin AutoScrub Wash Mitt is best used on better cosmetically maintained vehicles. 

Size: 6" x 8.7"