aradite epoxy steel AB glue

Descripción del producto

A component is the modified Epoxy Resin,the B one is modified Sulfur Curing Agent. It has temendous stength and durablity.It can be applied as thick as needed in one application.No need to buildup in thin layers since it dries by chemical recation to the resin and hardener,rather than by air evaporation.Can be sanded, filled,drilled when dry.No heat or pressure needed. Bonds to all metals,wood,glass,concrete and rigid plastics SETS IN 4 MINUTES.Will not conduct electricity or withstand direct flame.Withstands heat up to **0°F.

Feature

5 minutes rapid clear Epoxy is based on the room temperature,having the feature of(1)solidifing rapidly within **5 mins.(2)suitable for small parts and structural strength.(3)can be used after one hour.(4)quick set and high adhesive performance.(5)can be lacquered and waxed.(6)no solvent.(7)joint layer is clear and elastic.

Scope of Application

The products of this series are widely used for bonding all kinds of hard materials,like iron,casting iron, steel,alumium,glass, pottery, graphite, concrete etc.And the could be applied to bond and repair in the field of daily households,home appliance, machine implement for agriculture, machine facilities, appartus, stationary tools,arts, furniture,tube of water, valves,chemical piping,water towers, dam,pipesof water power plant etc.

Using Method:
1.The surface should be clean and dry, without oil or wax
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly

3.Press it according to the actual condition.. it could achieve the using intensity after the solidifying for one hour during the normal temperature, it is suggested to operate at above 

Warning:
1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess to much.
2.Tighten the caps after usage .Do not mix the cap of part A and B.
3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5.Take strict precautions against touching by the kids and entering into the mouth.

Storage and Packing:

1.Store on shady and cool place. The shelf life is one year. It is available to resuebased on passing of the test if being beyond the shelf life.

2.Preserve and transport as non dangerous products.