Descripción del producto

I. Characteristic: This product is based on resin raw materials, and additives from various scientific formulation. It has been tested that does not include any element silicon material. Non-toxic, waterproof, and anti-aging and good, clean; temperature endurance - *0 degrees ~~~ + **0 degrees. II. Application: It is mainly used in various for material which it plays sticking function. Such as plastics, glass, timber, pottery, metal etc. At the same time, sticking between metal materials and various soft materials are specially good. In industry mechanical equipment, paint, install apparatus, electronic apparatus, car, steamer, have dust workshop trade can be extensively used. III. The detailed methods of usage: The surface of to-be-Sticking things needs to be clean, non- dust, no oil .no water and so on. And then scribble glue on already sticking surface. And then heat it from *0 degrees to **0 degrees. Heating for 2 hours continuously. The colloid becomes hard after cooling. IV. Technical parameter: Item Unit of measurement Parameter Appearance *- Semi liquid Density g/cm3 1.3 Processing lead-time(*5℃) hours No restriction The best solidified time (*5℃) hours 1 ~ 2 Temperature ℃ **0~ ***0 Pressure Resistance MPa *7 Tensile strength MPa *5 Flexural elastic modulus MPa ≥***0 Shear strength MPa *7 Tensile strength MPa *5 Tensile strength of steel reinforced concrete MPa >C*0 concrete strength Shearing strength of steel reinforced concrete MPa >C*0 concrete strength **0℃boiling tensile strength MPa *8 ***0h shear strength MPa *0 Unconstrained linear shrinkage % 0.*1 Packaging specification: **0ML unit content per pcs, *8 pcs per box