Adxl330 Triaxial Acceleration Sensor Arduino Compatible

Arduino ADXL**0 Triaxial Acceleration Sensor

General Description:

The ADXL**0 is a small, thin, low power, complete *-axis accelerometer with signal conditioned voltage outputs, all on a single monolithic IC. The product measures acceleration with a minimum full-scale range of ± 3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.

The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application, with a range of 0.5 Hz to ***0 Hz for X and Y axes, and a range of 0.5 Hz to **0 Hz for the Z axis.

The ADXL**0 is available in a small, low profile, 4 mm × 4 mm × 1.*5 mm, **-lead, plastic lead frame chip scale package (LFCSP_LQ).

Special note: Don't inserted and pull the module directly when you don't turn off the power, otherwise it may be damaged, before using this module, you would better clear static elimination of body, otherwise that may damage the module!

This electronic bricks will extract all pins of X/Y/Z interface, and you may be directly connect with the sensor shield throughsensor cable or analog sensor cable, it support plug and play. The GS2 and GS1 switch can be used to choose the range.

Features:

1, *-axis sensing

2, Small, low-profile package

3, 4 mm × 4 mm × 1.*5 mm LFCSP

4, Low power

5, **0 μ A at VS = 1.8 V (typical)

6, Single-supply operation

7, 1.8 V to 3.6 V

8, *0, **0 g shock survival

9, Excellent temperature stability

*0, BW adjustment with a single capacitor per axis

*1, RoHS/WEEE lead-free compliant

Specification:

1) Voltage: 1.8V*3.6V

2) Acceleration Range: ± 3.6g

3) Low power: **0μ *@********************μ A