350W series Switching Power supply

Descripción del producto

**0W Series Outputs:
5V/*0A, 7.5V/*0A, *2V/*9A, *3.5V/*5.8A, *5V/*3.2A, *4V/*4.6A, *7V/*3A, *8V/7.3A

Features:
High efficiency, high reliability, low cost
Universal AC / full range
**0% full load burn-in test
Protections: Short circuit/ Over load/ Over voltage
PWM control and regulated
Forced air cooling by built in DC fan
Built-in cooling Fan ON-OFF control
Fixed switching frequency at *5KHz
2 years warranty
Dimensions: **5***5**0mm( L*W*H)

Specifications:
Input:
Voltage Range *0~**2 VAC/**0~**4VAC*7~*3 Hz; Selected by switch **4~**0VDC
AC Current 6.5A/**5 V 4A/ **0 V
Efficiency *3%(SP*****5); *6%(SP*****7.5); *4%(SP******2);
*9%(SP******3.5); *8%(SP******5); *1%(SP******4);
*2%(SP******7); *3%(SP******8);

Inrush Current Cold start *0A/**5V*0A/**0V
Leakage Current <3.5 mA/**0VAC

Output: See the following form

Setup, Rise, Hold Time: **0ms, *0ms, *0ms at full load

Protection:
Over Load **5%~**5%
Protection type: Fold back current limiting, recovers automatically after fault condition is removed

Over Voltage **5%~**5%
Protection type: Hiccup mode, recovers automatically after fault condition is removed

Over Temp. L: RT3≥ *5º C FAN ON, ≤ *5º C FAN OFF,
≥ *0º C output shutdown (5~7.5V)
RT3≥ *5º C FAN ON, ≤ *5º C FAN OFF,
≥ *0º C output shutdown (*2~*5V)
RT3≥ *0º C FAN ON, ≤ *0º C FAN OFF,
≥ *5º C output shutdown (*4~*8V)
Environment:
Working Temp., Humidity **0º C~**0º C; *0%~*0 %RH
Storage Temp., Humidity **0º C~**5º C; *0%~*5 %RH

Safety:
Withstand Voltage I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: **0M Ohms/**0VDC

Standard:
Safety Standard Design refer to UL***0
EMC Standard Design refer to EN****2, EN****4, EN****0

Others:
Weight 1.*7Kg
Packing *2PCS/*3.5Kg/0.*8CUFT

Note
1. All parameters NOT specially mentioned are measured at **0VAC , rated load and *5º C of ambient temperature.
2. Ripple & noise are measured at *0MHz of bandwidth by using a *2" twisted pair-wire terminated with a 0.1μ &*7μ Parallel capacitor.
3. Tolerance: Includes set up tolerance, line regulation and load regulation
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

For more information, please contact us.